How to Reset Furrion RV Television

Question

Question:

My tv is not bringing up the set up wizard. How can I use the remote to start the set up process?

asked by: Greg

0

Expert Reply:

For Furrion TVs the way to enter the setup wizard is to perform a hard reset. To do that you'd unplug the TV, hold down the power button for a minute (weird, I know) and then plug TV back in and press power button once.

expert reply by: Jameson C

0

Lori H.

11/2/2021

When using the menu button, I can't select "channel" in order to switch from air to cable.

Reply

Les D.

11/3/2021

@LoriH Since this is a "universal" remote" not all features will be named the same. When you go to menu, do you have a selection marked "Source" or "Input"? This is what most TV name this function. Also, if you have the input set to HDMI or USB (instead of Cable or TV (OTA) you may not be given the option for that change. Let me know if this helps. If not we will dig a little deeper.

Reply

Answer 1

To perform a hard reset on your Furrion television you will first unplug the TV. Then you will hold the power button down for one minute. Release the power button and then plug back in the TV. After you plug in the TV you will press the power button…

view full answer...

Answer 2

I reached out to my contact at Furrion who said that if your Furrion Remote, like part #FR34FR, isn't working even after replacing the batteries then there are 2 other things you can try. First off inspect the contacts where your batteries…

view full answer...

Answer 3

If you've ensured that your battery contacts are good and not obstructed or dirty, and the batteries don't need to be changed, then I recommend replacing the entire remote with the Furrion Unismart Remote Control #FR34FR.

view full answer...

Answer 4

Yes, the Replacement Foot Pad for Lippert Hydrualic Leveling System #LC324269 will work with your Lippert Level Up system, on your 2018 Coachman SportsCoach 407FW. I have attached a picture of this foot pad being used on a Level Up system.

view full answer...

Answer 5

I was able to track down the install and programming instructions for the remote that comes with the Furrion televisions and attached them to this page. The universal remote #FR34FR will work the same way.

view full answer...

Answer 6

There is a universal remote that you can use, but not a Terk universal remote as they would not be compatible with a Furrion system. Instead, for your Furrion TV and DVD system, the correct replacement is the Furrion Unismart Remote Control #FR34FR,…

view full answer...

Answer 7

The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube…

view full answer...

Answer 8

Pushing the pin back into the breakaway switch should allow the brakes of the trailer to release. You may have to back the trailer up slightly to get the brakes to release. If you have tried that and are still having problems you may need to replace…

view full answer...

Answer 9

Hey Jack! I would get the MORryde StepAbove RV Steps #MR98RR. These are for an entry height of 30" and 33-1/2" which will be the best option. Looks like you have 26" wide doors so this would be the correct part for your trailer. Worst…

view full answer...

How to Reset Furrion RV Television

Product Page this Question was Asked From

Continue Researching