Towing Mirror Recommendation for a 2001 Ford F-150 With Turn Signals on the Mirror Housing

Question

Question:

I have an 2001 f150 with the turn signal on the housing and i am trying to find a towing mirror set for it. Its on an extended cab with two full size doors and two smaller dorrs. Any help would be great.

asked by: Dominick M

0

Expert Reply:

The K-Source Custom Towing Mirrors, # KS81600, will fit your 2001 Ford F-150 with turn signals on the mirror housing. There is space behind the mirror glass on the K-Source towing mirrors for the external turn signal. Keep in mind, this mirror will block the external turn signals.

We have also had customers submit reviews saying this mirror fit their side mirrors with turn signals. These mirror are simple to install and includes the driver and passenger side mirrors.

expert reply by: John H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Edward, thanks for reaching out! I recommend using the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C83WR as-is because adding the RockerBall will just add more potential for uncontrolled movement as they might work against each…

view full answer...

Answer 6

The distance from the hitch pin hole to the center of the hitch ball of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR that you referenced is 13-1/4 inches.

view full answer...

Answer 7

The Curt Rebellion XD part #C57UR measures 10 inches from the bottom of the shank that inserts into the hitch opening to the bottom of the ball mount. So you would lose 10 inches of ground clearance measured from bottom of your hitch.

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 20K #C57UR is going to help dampen the jerking, jarring, bumps, vibrations, chucking, and rattling you may be experiencing but isn't going to evenly…

view full answer...

Answer 10

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 11

I believe you mean Load Range since the Load Ranger was the unsuccessful brother of the Lone Ranger. For any given tire size there can be different load ranges. The different load ranges have different weight capacities. This has to do with the…

view full answer...

Towing Mirror Recommendation for a 2001 Ford F-150 With Turn Signals on the Mirror Housing

Product Page this Question was Asked From

Continue Researching