Installation Instructions for Timbren Suspension System on a 2012 Nissan Frontier Pro4X 4x4 Off Road

Question

Question:

Hi, I have a Nissan Frontier 2012 Pro4x 4x4. What do I have to do to install these on this truck? Thank you

asked by: Dan

0

Expert Reply:

To install the Timbren Rear Suspension Enhancement System, # TTORTUN4L, on your 2012 Nissan Frontier Pro4x 4x4 you will need to safely raise the vehicle to allow the axle to hang freely, then loosen the axle u-bolts and remove the OEM rubber bump stop.

Next, install the lower bracket from the Timbren kit where the OEM bump stop was.

Finally, tighten the U-bolts and safely lower the vehicle.

I have attached installation instructions for you to review.

expert reply by: Robert G

0

click to enlarge

Rick S.

1/29/2013

Bob,I have over 10K Installed miles driving with the Timbrens installed on my Pro4X which you have pictured hooked up to my Jayco X17X. The product has worked as advertised and so far I am a happy customer. Unloaded the truck acts stock, loaded you know the Timbrens are working,Let me know if I can help with providing more pictures or information regarding this product and my Nissan Pro4X.ThanksRick

Reply

Patrick B.

2/8/2013

Thanks for the feedback, glad the Timbrens are working well for you.

Reply

Answer 1

Due to the design of the Timbren kit part #TABSOSR it would potentially fill with water if they were submerged. This eventually could lead to rusting out the base and even one guy remarked that when filled with water there is a "fart sound"…

view full answer...

Answer 2

It sounds like you're looking for the Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2020 Nissan Frontier. These are great for towing or hauling and will work to reduce sag/squat without minimizing axle travel.

view full answer...

Answer 3

The correct Timbren Rear Suspension Enhancement System for a 2019 Toyota Tacoma is part #TTORTUN4L if you have three leaves in the rear leaf spring pack or part #TTORTUN4 if you have four leaves in the rear leaf spring pack. Therefore, the main…

view full answer...

Answer 4

The total height of the Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2011 Nissan Frontier is 4-5/8". If you want to add spacers you'll use the Timbren Spacer part #TA25722-90P00 and or part #A25723-90AH00. In regards…

view full answer...

Answer 5

By design, the Sumo Springs Solo Custom Helper Springs, part #SSR-209-40, don't normally affect your ride height. However, there are some applications where there will be contact with the springs just because of the distance from the frame to the…

view full answer...

Answer 6

That is correct, the SumoSprings Solo Custom Helper Springs #SS46EV will replace the factory bump stop on your 2022 Nissan Frontier. Installation requires the removal of the factory bump stop and frame mounted cup. Once this is done you will thread…

view full answer...

Answer 7

In regards to suspension enhancements for a 2018 Nissan Frontier, you have a few options but there are none from SuperSprings. The best option for unloaded ride quality would be the Firestone Ride-Rite Air Helper Springs part #F2558. However, if you…

view full answer...

Answer 8

The main difference when comparing Timbren and SumoSprings for suspension enhancement is going to be the weight capacities. Timbren uses hollow rubber springs that is able to support more weight but they can cause a firmer ride. The SumoSprings are…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Installation Instructions for Timbren Suspension System on a 2012 Nissan Frontier Pro4X 4x4 Off Road

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching