Mounting Bolt Pattern of Optronics Trailer Light Kit TLL56RK
Updated 11/04/2020 | Published 11/03/2020
Question:
I need a submersible trailer light kit to bolt on to my galvanized trailer. Current lights are 8inch wide, 3inch tall, 2.5/8inch deep. The 2inch bolt pattern when looking at the light face on the passenger light: 23/4inch from left, bolt, 2inch on center, bolt, and 31/4to the right edge. I have some room for adjustment on the left edgeinside of light but none on the right edge. Any more than 3.25 on the right, and the light would extend beyond the bracket. Item #TLL56RK has the bolt pattern in the description but the dimensions of the bolt pattern are not listed. What is the minimum distance from the top of the light to the bolt. Do you have any sugestions?
asked by: LeRoy H
Helpful Expert Reply:
The distance between the mounting holes of the Optronics trailer light kit part # TLL56RK is 2 inches like you mentioned needing. The distance from the mounting holes to the top of the light is 1.825 inches.
Product Page this Question was Asked From
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop
- Tail
- Turn
- Rectangle
- Kit
- Surface Mount
- Submersible Lights
- LED Light
- 6L x 3-1/2W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Can the Top of the 24x60 etrailer Enclosed Cargo Carrier Cage Be Removed?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can Air Lift Compressor System AL77DQ Be Used For An Air Horn?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What TorkLift Tie Downs do I Need for My 2022 F-350, and What are the Weights?
- Q&A: Keyed Alike Hitch Pin Lock for Replacement Shank for Gen-Y Adjustable Ball Mount 325-GH-306
- Q&A: What Are The Dimensions Of The Metal Post On The CE Smitch Post-Style Guide-Ons?
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: What do I Need to Completely Replace my Boat Trailer Lights
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing