My SaltDogg Controller Shows the Letter P Code NOT Flashing what Does this Mean

Question

Question:

What is the "P" code on my brake controller what should I do ?

asked by: Newt

0

Expert Reply:

The "P" code on your Replacement Variable Speed Controller for SaltDogg Salt Spreader part # BP54FR is the code for the spinner motor being disconnected. They recommend inspecting the wire harness/motor for damage and then reconnecting and retesting.

This can very likely be a corrosion issue as well check the plugs carefully and clean what is necessary.

Basically the Controller is not recognizing that the motor is present and needs to see it before it will operate.

expert reply by: Randy B

0

Answer 1

If you're getting a flashing letter P on the Replacement Variable Speed Controller for SaltDogg Salt Spreader #BP54FR, it indicates a spinner motor overload. To resolve this, inspect and clear the spinner disc as outlined in the troubleshooting…

view full answer...

Answer 2

I spoke to Buyers about the issue you're having with your SaltDogg Salt Spreader and they informed me that you will want to apply power directly to both the spinner and auger to ensure they are working correctly. The systems all feed back into…

view full answer...

Answer 3

According to the attached Troubleshooting Chart, the letter L displayed on the SaltDogg Controller #BP54FR indicates low voltage (less than 10V for more than 10 seconds) applied to the system. This will cause the controller to shut off automatically.…

view full answer...

Answer 4

The problem you're seeing with the SaltDogg Electric Tailgate Salt Spreader #337TGS03 sounds like it's either with the controller or with the harness. Try testing the harness by applying power to make the motor spin. If the problem still…

view full answer...

Answer 5

The blinking J on the Controller for SaltDogg Salt Spreader #BP54FR indicates the spinner motor is jammed. You will need to turn the controller off and clear the jam.

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 7

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 8

No, it does not but Firestone does make one. It is the No-Drill Mount Kit for Firestone Air Tank and Compressor item #F2530. This will allow you to get the Firestone Air Command Extreme Duty Air Compressor with Tank item #F46VV installed and you…

view full answer...

Answer 9

Hey Jim, for your 2025 Ford F-250 crew cab dually we have the Air Lift LoadLifter kit part #AL73DQ that is a confirmed fit and would work great. It was actually designed specifically for the dually models as well. Are you looking for a compressor kit…

view full answer...

Answer 10

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

view full answer...

Answer 11

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

My SaltDogg Controller Shows the Letter P Code NOT Flashing what Does this Mean

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching