Hitches and Recommendations for Towing a Pontoon Boat and 5 Bikes on a 2016 Honda Odyssey
Published 09/24/2020 >
Products Featured in This Question
Question:
hello, I have a 2016 Honda Odyssey and I am aiming for choosing the right hitch for towing a trailer with a pontoon boat or foundation for 5 bicycles including the bicycles... What is the match hitch? and what are the differences between Weight Distribution Towing Capacity and Towing Capacity?
asked by: Roy
Expert Reply:
The best hitch you can equip your 2016 Honda Odyssey with is the Draw-Tite Max-Frame, part # 75270. I've linked to a video installation of this hitch on a 2016 Odyssey. It's a Class III hitch with a 2" receiver that has a maximum gross tongue weight of 675 pounds and a maximum gross trailer weight of 4500 pounds. With a weight distribution system added, that maximum trailer weight goes up to 5000 pounds, which leads me to your next question.
The maximum towing capacity is a reference to how much weight the hitch is capable of pulling behind it. The weight distribution towing capacity is how much weight it can pull behind it when a weight distribution system is added to it. An example of one is the Curt MV, part # C17062.
Keep in mind that you still need to consult your owner's manual for how much weight your vehicle can tow as that will more than likely be less than what the hitch is capable of.
If you plan on towing a trailer, then you will need a few things. They are a ball mount, a hitch ball, and wiring.
Which ball mount and hitch ball you need will depend the height of your trailer. I've linked to a help article that will help you determine this as well as our lists of ball mounts and hitch balls.
For wiring, I recommend the Curt T-Connector, part # C56378. It has everything thing you need to set up your trailer's lights. I've linked to a video installation of this harness on a 2013 Odyssey.
If your trailer has a 5-pole hookup, then you will need a converter. Part # 20036 will do the trick. I've linked to a video review of this converter.
Finally, for your bikes, we do offer a 5-bike rack. It's the Curt Premium 5 Bike Rack for 2" Hitches - Tilting, Item # C18065. It will hold 5 bikes by their frames. I've linked to a video review of this as well.

Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 600 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media





Continue Researching
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Install: Draw-Tite Max-Frame Trailer Hitch Receiver on a 2016 Honda Odyssey
- Q&A: Spacer Block and Bolt Size for Trailer Hitch 75270
- Q&A: Will the Trailer Hitch for a 2016 Honda Odyssey Fit a 2019 Honda Odyssey
- Q&A: Troubleshooting Bolts that Wont Thread into Vehicle Frame for Hitch Install
- Q&A: How to Order Replacement Hardware for Draw Tite Hitch 75270
- Search Results: 5/8 hitch pin
- Shop: Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Q&A: Parts Needed to Tow Popup Camper with 2015 Honda Odyssey
- Q&A: Will Draw-Tite Trailer Hitches Fit Both 2006 and 2015 Honda Odyssey
- Q&A: Selecting Ball Mount to Allow Trailer to Remain Level When Hitched to 2012 Honda Odyssey
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
- Shop: Replacement Clips for TowSmart Hitch Pins - Qty 3
- Shop: TowSmart 5/8" Diameter Hitch Pin w/ Clip
- Shop: Hitch Pin Clip for 5/8" Diameter Pins - 3-1/4" Long - Qty 1