To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1817 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Exactly as described! I have an older 2011 Honda Odyssey that I needed a hitch for and didn’t want to spend a ton of money for the minimal use it would get. When I researched hitches etrailer kept coming up with great reviews. Their site rated the install at 3 out of 10 stars and the reviews said 1-2 hours doing it alone. It was super easy. No ramps or special equipment or fancy tools needed!
I cannot grade the towing capability yet, but this review is on installation. Less than one hour from start till I was putting tools away on the same day of arrival.
One man job with the assistance of a rolling floor jack.
Put rear up on ramps, hit holes with wd40, used one bolt to test run all threads, did not unhook tailpipe, simply insert the plate in, over, and let it rest on on exhaust (majority of weight still supported by jack). Start with left side, place 1 bolt loosely and then continue to switch sides with two at a time. Used torque wrench at 68 lbs to finish securing. Done. Looks great too! Up next: electrical and trans cooler. Thank you etrailer for the product and videos. Bought the hitch bc of such great reviews.
This can be a one man job if you have ramps and a short step stool. The thing that made the install take longer than 30 minutes was that the bolts on the passenger side would not line up if the drivers side bolts were on. I had to remove all the bolts on the driver side and set the hitch on a step stool 12 inches high so that the driver side was about 3 inches away from the mounting location. This was the only way i could get all three passenger side bolts to line up. Torqued to 69 pound-feet and i was done. Three stars for those three bolts.
Randy C.
6/12/2015
I had the same problem and it was a nightmare. Why is everyone giving this 4-5 stars then? Box arrived was a joke. The the holes didnt align. Im curious whether the reviews are real or not.
Rachael H.
6/15/2015
I'm not sure how a hitch install could be any easier. It doesn't require two people because you can hang the passenger side of the hitch on the tailpipe while you start one of the bolts on the drivers side. By a mile, the hardest part is chasing the existing threads on the van. My van had traveled many dirt roads and the grime was thick on the underside. Still, this wasn't a hard job at all. I've included pics of the installed hitch and the 6 bolts (yes, only 6) that are required to do this job. We're going to the lake this weekend and we'll be pulling the popup behind us. We also bought a transmission cooler from this site as well and it's going to keep the transmission cool while we're hauling kids, bicycles, pets, and everything else down to the campsite.
Chris H.
6/8/2017
Now that a year has gone by Im happy to report that this hitch has been a great performer. No issues, troubles, hiccups, or regrets about this purchase.
This trailer hitch receiver was/is stronger than expected and the fit was perfect. It installed very easily with a second set of hands to help and the etrailer videos very helpful and were exactly correct for my vehicle.
Works great. I have used it for pulling a trailer and with a motorcycle carrier. The installation video made it super easy to put on.
This hitch is a perfect fit for my Honda Odyssey. The installation took less than 1 hour with me working by myself. Would have been a little easier with the help of another person. Installation did not even require jacking up the vehicle.
Free shipping delivered within 3 days! The bracket ends were sticking out of the box and had minor cosmetic scratches which did not affect installation or function. Hitch is over 40lbs, oversized & bulky shape so not a surprise to see that. I read installation would take hours and required ramp to raise back end but that was not the case for me. We're in SoCal where there's not much rain so cleaning mounting holes on the frame was really easy. A single spray of WD-40 and I was able to hand screw all 6 bolts. I only had to pop the tail pipe off the last rubber mount to get at the bolts on right side. I used 2 car jacks to lift up & position the hitch to be mounted (see pic). In fact not raising the back end allowed easier installation for me. The longest time was spent nudging hitch to get that last bolt in. Total job time - about 2 hrs from opening box to completion. Excellent hitch, strong solid feel, and much easier installation than expected.
Love the trailer hitch and bike rack. We put four bikes on it and it holds them solidly. Very satisfied.
It was easy to purchase exactly the parts I needed. I know very little, but I was able to order and bring everything necessary to my mechanic.
Bolts do not work… I’m upset for trailer hitch
Jenny N.
6/6/2024
I was not sure what you meant with the bolts however a complaint that we receive is that the bolts seem to be too big. When this happens it is often because there is road debris and grime that has built up inside the weld nuts that need to be cleaned out. Often it takes using a tube brush like part # 814113 and soaking the weld nuts with a spray lubricant like a WD-40 to clean them out. You may have to do it several times. I have included a video link below.
Helpful Links
I received all 6 of the plates, only 4 of the washers and only three of the bolts needed to install the hitch. I had to find the parts online and order.
Easy to install and works fantastic.
Bought a trailer hitch for our 2009 Honda Odyssey. The only hitch (get it) was that it was delayed in shipping by one day. The delay was by UPS, not etraler's fault. We live in a remote part of California, so that's not very unusual.
The hardest part of the instillation was getting the rubber exhaust hanger free. A squirt of WD40 took care of that. It bolted up perfectly, as if it came from the Honda factory.
I also bought the trailer wire kit. My biggest anxiety was getting the interior panels off without damaging the clips. They came off easily and the wire kit installed as easy as the hitch.
Overall, it took about 2 hours from start to finish. That includes getting out the jack, stands, tools, being interrupted by my two year old a few times and cleanup.
I chose etrailer because of the price for a Draw-Tite hitch. I had found cheaper hitches online, but didn't know the brands. I trust Draw-Tite. We are in the market for a vintage camping trailer and this is what we need to pull it.
I told my wife that this was easiest part I've ever installed. It went as straight forward as the instructions showed.
Thank you etrailer.
Dave C.
4/28/2019
Our hitch is still working great. When the time comes to get a new vehicle, I’ll be looking to etrailer if it doesn’t already have a hitch. I’m very happy with my purchase.
Showed up in perfect condition. Installed easily. Just a heads up for anyone looking to install a hitch on a Honda Odyssey, get a m12x1.25 tap and clean out all the bolt holes before hand.
Good hitch. Installation was easy fit is good. The only concern is that receiver is deep in and under the bumper so some accessory's may not fit.
Excellent product and how-to video. Only drawback is that installation is a 2-person job, for holding the hitch in place while bolts going in, and it's easier if you have a jack handy that can push it up to the frame when inserting the first bolts.
Installed last weekend. Tourqed it last night all in all pretty smooth. I jumped the gun and purchased a tap to clean the holes up and I'm glad I did. 10 years of brine can really gum things up. The only thing I didn't agree with in the instructions was removing the exhaust support and getting the exhaust pipe to the side. To many chances to damage the rubber pipe hangar. I ended up jacking up the right rear end of the van to get enough ground clearance and did not have to disturb the pipe except a slight push to the side while putting the receiver in position. All in all pretty easy with a little preparation.
Ben
5/20/2019
Great. Still love it.
This does not fit on a 2011 Honda Odyssey 4 out of 6 holes will accept the bolts but certainly not the final 2.
Hitch receiver was simple to install and did not require more than one person. Packaging of the shipment was the only less-than-ideal factor of the purchase
Hitch was very easy to install per included instructions. The hardest part was holding the hitch in place while I installed the bolts. I used blocks of wood to hold the hitch in place. Thanks again for a quality product with easy installation!
George M.
6/7/2021
Its still proving to be a valued product!
can be a one person job when following the video guide and do a little bit research,
this hitch is solid and sturdy, have been loading a 75 pounds ebike for a few weeks without any problem.
i built my own ramp using solid wood as many reviewers did.
Figo
9/24/2018
Still good
The kit was perfect. I had real trouble finding the proper tap to run into my threaded holes in my Honda Odyssey. Not sure if etrailer sells a kit that has the right tap or not but they should. I had trouble tapping the holes around the muffler. All in all the kit I bought fit perfect and it was just my own short comings the gave me the trouble. Highly recommend etrailer!
Victoria B.
6/16/2020
If you need a tap for your Odyssey to install this Draw-Tite hitch, you would want one that is 12 mm x 1.25 Tap size. If your weld nuts have been exposed to road grime for years and a wire brush just will not cut it, a tap can help clean the threads so you can install your hitch.
This was easy to install if your slightly handy and have some basic tools. The hitch has held a Thule swing arm style 4-bike rack, loaded with all 4 bikes. We have taken this hitch on a road trip from WA, thru ID and MT and to MN, and back. Unloading and loading for bike rides along the way. We have used this for multiple camping trip, again loaded with the Thule rack and all the bikes. Never once have we had any issue with the hitch. When you compare the price of a dealership and ordering off the internet (here) it was enough of a price difference to take the risk and this one paid off huge! So worth it! Do not use a dealer if you are ok installing this yourself. There are install video tutorials to follow. This product had been rock solid for our family. Oh, we have it on a Honda Odyssey, 2014. Sad we have no photos of it all loaded with the bikes. And funny, we just unloaded them all two days ago from a trip... sorry, but I promise it is impressive!
I was lurking the etrailer site for about 3 months, then after reading all the consistent good reviews and watching the very informative video, I decided to go for it. I ordered the Draw-Tite because it was the same initials as mine, no really I did. Package arrived on time, kept an eye on it with the tracking number anyway. The DT hitch had all the necessary parts come with it. The only main flaw was a blemish on the cross-tube's finish. I dont think it will effect the product in the long-run, but I took a pic of it anyway, so we shall see. Installed it by myself, did not remove the muffler, about 45 minutes total and did not rush myself at all. Looks great, exactly as it appears on the website, so far so good. Put my Thule 2-bike carrier on it, works perfect. Adding a cargo rack this Memorial weekend to drive down to San Diego, this will be a true test. About a month in after install, I am noticing a couple "rust" spots in the receiver hole. That's a little weird for my area of Southern Cal, because it doesnt rain and I DO NOT park near sprinklers or water sources while in my driveway. Going to take a pic and let the etrailer guys know about it and see what they say...
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jarrett N.
3/9/2016
Wonderful. Great towing hitch. Looks clean, sleek, and strong. No problems at all. Well pleased! Have used numerous times for towing.