Recommended Weight Distribution System for 9500 lb GVWR Dutchmen Astoria Travel Trailer

Updated 06/18/2020 | Published 06/16/2020

Products Featured in This Question

Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW

(235)

$798.46

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2600)

$24.13

etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity

(811)

$219.10

Question:

have just sold my old trailer . was a coachmen 25rks with dry weight of about 6000 lbs. had a 800 lb husky round bar 501-800lb weight distribution system. buying a astoria 2773rb with a fully loaded trailer at 9500 lbs . can i just replace the bars or do I have to buy whole new system? I know most people only use part of cargo load so im thinking 8000 or more.

asked by: Steve

Expert Reply:

Husky doesn't offer replacement spring bars, so you'd need to replace the system.

The GVWR of your Astoria 2773rb is right at 9500 lbs, as you mentioned. Since a trailer's tongue weight is typically between 10-15% of its fully loaded weight, your tongue weight could range from 9500-1400 lbs, in the worst case. The best thing to do is to conclusively determine your trailer's fully loaded tongue weight. You can use a tongue weight scale like the etrailer # e99044, or one of the other methods mentioned in the article I'll link for you.

I'd recommend you go with the Reese Steadi-Flex, part # RP66561 which is compatible with trailer tongue weights ranging from 700-1400 lbs which would be absolutely perfect for the tongue weight you're looking at. The 2-5/16 trailer ball is sold separately as # 19286.

The # RP66560 is rated for 600-1200 lbs of tongue weight, and might not have enough capacity for your needs.