Place of Manufacture for Curt 16085 Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails

Question

Question:

Where is this Spyder hitch made

asked by: Steven G

0

Expert Reply:

The Curt # 16085 Spyder is manufactured overseas in China. If you're looking for something made here in the USA, I'd recommend the # DM5996 from Demco.

If you click the provided link, you can see a product description video for the hitch.

expert reply by: Mike L

0

Answer 1

To measure correctly for a Fifth Wheel to Gooseneck Trailer Adapter (see link) you will need to have your vehicle and trailer positioned level. If your truck is at a pitch or parked on a grade, and the trailer is level, the measurement will not be…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 6

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 7

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 8

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 9

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Answer 10

Hello Joe, thanks for reaching out. If you were to install a B&W Tunoverball Gooseneck Hitch #BWGNRK1020 you would be able to easily transfer your #BWRVK3400 5th wheel hitch to your new truck. If your new 2025 GMC 2500 HD comes with the factory…

view full answer...

Answer 11

Hey Paul, we have great hitch solutions for the OEM pucks of your 2024 Ford F-350 short bed but whether or not you need a slider hitch is going to be based on the design of the trailer you plan to tow. Normally with a short bed truck you need a…

view full answer...

Answer 12

Hey Craig, yes the leg kit part #e89PR that you referenced will work to adapt the head of a Curt A20 hitch to fit the OEM pucks of your 2024 Chevy Silverado 3500. How'd you like your A20 hitch?

view full answer...

Place of Manufacture for Curt 16085 Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching