Does Junction Box 7-Way Kit # HS381-9000 Have Dodge Ram Trailer Wiring Color Code

Question

Question:

your 7 wire trailer junction box I watched the video and this is not color coded for a Dodge Ram 7 pin plug correct ? thanks

asked by: Rick P

0

Expert Reply:

The 7-way junction box part # HS381-9000 that you referenced is color coded for standard trailer wiring like what it installs on but most likely not the same colors as Dodge Ram trailer wiring. This installs on a trailer though and would not be the correct type of 7-way to install on a vehicle which requires a female 7-way socket like # PK12-707E.

The junction box has all of the pin labelled inside of it with what function each pin/wire represents to make install as easy as possible.

expert reply by: Jameson C

0

click to enlarge

Rick P.

5/12/2020

It would be really great if you could take plug apart and track down wires to the pins in the plug

Reply

Jeff D.

7/20/2021

@RickP it's trivially easy to check which wire goes where using the continuity function of a multimeter. No need to take anything apart.

Reply

Rick

7/21/2021

@JeffD but some times you need to change the location of the pin would be great if the plug came apart

Reply

Answer 1

When you bleed the brakes on your trailer after installing the Kodiak Calipers #KDBC225DAC, you will want to start with the brake that is furthest away from the actuator. Of the two bleeder valves, you will want to use the bleeder valve that is on…

view full answer...

Answer 2

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

view full answer...

Answer 3

The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…

view full answer...

Answer 4

I more or less agree with you. The Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, is a cleaner look and if you got a bad weld job you would not have a safe setup. I have done some welding, I am in no way a…

view full answer...

Answer 5

Buyers Products Straight Tongue Trailer Coupler #3370091562 should be installed with bolts through all three holes in the channel mount so that it can meet its published weight specs. Two of the holes are spaced at 3-inches on center; the third is…

view full answer...

Answer 6

Yes, most trailer tongues are boxed so you'd simply use one bolt through both sides of the frame to install a coupler like the Buyers Products Straight Tongue Trailer Coupler part #3370091560. In this case you would use three bolts, grade five.…

view full answer...

Answer 7

Because Buyer's Products considers the build sheets and CAD drawings to be proprietary information, they won't provide copies of that. This being said, I pulled one of the #3370091560 Buyers Products couplers from stock and and measured the…

view full answer...

Answer 8

It sounds as if the holes in the trailer frame are not drilled straight through the tongue, or that the coupler spread a little bit after it was stamped at the factory. The coupler should conform to the shape of the frame when installed. The first…

view full answer...

Answer 9

Yes, you can absolutely drill holes in your trailer tongue to install the 10,000 lb capacity Buyers Products Straight Tongue Trailer Coupler #3370091560. This is a pretty common occurrence due to the various bolt hole patterns of straight tongue…

view full answer...

Answer 10

To convert a trailer with hydraulic disc brakes to electric-over-hydraulic (EOH) actuator operation you will need to either replace or immobilize the existing surge coupler so it no longer compresses. A bolt installed horizontally through the coupler…

view full answer...

Answer 11

If it is a 1000 psi then it would be the Hydrastar for drum brakes. The newest one is #HBA-10 and it has different wire colors, see picture. So you know that black is 12 volt power in and white is the ground. Blue/white goes to the break away switch.…

view full answer...

Answer 12

For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…

view full answer...

Does Junction Box 7-Way Kit # HS381-9000 Have Dodge Ram Trailer Wiring Color Code

Product Page this Question was Asked From

Continue Researching