Ramp Hinge PLR1902 For Making Swing Out Trailer Barn Doors
Question:
Hello, We are looking for barrel hinges that could be used for double doors at the tailgate on a utility trailer. They would need to swing out so that the doors swing 225 degrees all the way to the side of the trailer. Also looking for something like the Side door Bar Lock Assembly item # 305736 that we could use to latch the doors into the frame when closed. If we had to purchase the 36” assembly I think we could cut it down. One more thing, looking for something that we can use to temporarily latch the doorS to the sides of trailer when open, so that we can work at the end of the trailer. I have attached a picture of the trailer. It has 24 inch high wooden sides and we are anticipating making changes to accommodate the doors. Thanks so much!
asked by: Barbara
Expert Reply:
The Ramp Door Hinge # PLR1902 that you referenced could swing out as far as you are needing so it would work well for you. The slide door bar lock assembly part # 305736 can also be cut down as needed as well.
Then for a mechanism to lock the door open you could use a rubber socket and plunger set like the part # PLR64-66.
Products Referenced in This Question
Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
- Trailer Door Latch
- Latches
- Cam Door Latch
- Lock Not Included
- 36 Inch Long
- Polar Hardware
more information >
Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Trailer Door Hinges
- Ramp Door Hinge
- Greasable Pin
- Steel
- 8-3/16 Inch Long
- 4 Inch Wide
- Weld-On
- Polar Hardware
more information >
Plunger and Socket Trailer Door Holder - 2-1/4" Plunger - Zinc Plated Steel
- Trailer Door Holders
- Plunger and Socket
- 2-1/4 Inch Plunger
- 2 Inch Hole Spacing
- Rubber
- Polar Hardware
more information >
Product Page this Question was Asked From
Dump Door Hinge for Dump Trailers - Steel - Qty 1
- Trailer Door Hinges
- Dump Door Hinge
- Greasable Pin
- Steel
- Weld-On
- Polar Hardware
more information >
Continue Researching
- Shop: Dump Door Hinge for Dump Trailers - Steel - Qty 1
- Shop: Spring Latch for Trailer Tailgate - 4 Hole - 2-7/8" x 2" - Stainless Steel - Right Hand
- Search Results: trailer gate latch
- Search Results: spring latch
- Video: Spring Latch w Extended Handle for Trailer Tailgate Spec Review
- Video: Review of the Roller Ramp Door Greasable Hinge Pin
- Video: Comprehensive Review: Dump Door Hinge for Dump Trailers
- Q&A: Option For Hinges For Trailer Ramp Door
- Q&A: Door Hinge Bracket with 4 Inch Width
- Q&A: Recommended Hinges And Ramp Assist For Steel Ramp
- Shop: Roller Ramp Door Greasable Hinge Pin - 9" Long - 1" Pin Diameter - Steel
- Shop: Weld-On Zinc Spring Latch
- Shop: Bent Roller Ramp Door Hinge Pin - 10" Long - 3/4" Diameter
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Shop: Spring Latch w/ Holdback for Trailer Tailgate - 3" x 1-1/4" - Zinc Plated - Right Hand
- Shop: Trailer Hitch
- Search Results: trailer door hinges
- Article: Trailer Wiring Diagrams
- Video: Ultimate Overview of the Ramp Door Hinge
- Search Results: trailer door latch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: All You Need to Know About the Side-Door Bar Lock Assembly
- Shop: Trailer Wiring
- Video: Review of ABS Fasteners Trailer Door Latch - Latches - ABS99FR
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer hitch
- Article: Trailer Lighting Requirements
- Shop: Brake Controller
- Video: Ultimate Overview of the etrailer Enclosed Trailer Transition Plate
on Trailer Door Parts
