Trouble Removing Front Bumper Fascia On a 2019 Jeep Cherokee

Question

Question:

Hi, Ok - just attempted to do this. Hit a major road block with the facia removal. I looked at the video several times. Clearly you edited something out. It does not just pop off as you showed. What was used to pry things apart? Also - there seemed to be a set of star bolts on the front of the facia that you did not note.

asked by: Neil V

0

Expert Reply:

It can be difficult to remove the front bumper fascia on any given vehicle and the 2019 Jeep Cherokee is no exception. If you take a look at the attached video on the Roadmaster Direct-Connect Base Plate Kit part # RM-521451-5 you will see that if you use a trim panel tool between the headlight and bumper fascia that will then help removing the fascia while you are pulling away at the wheel well.

Please note, the process can vary slightly depending on which trim package you have as well as the location/type of fasteners used so please be sure to pay attention to any special notes in the install instructions that are trim level specific.

expert reply by: Conner L

0

Answer 1

Hey James! Congrats on your new purchase! To flat tow your 2022 Jeep Cherokee Trailhawk you will need the following parts: Base Plate Kit - Blue Ox Base Plate Kit item #BX1143. This is designed specifically for the Trailhawk models and will work…

view full answer...

Answer 2

No, when you are flat towing a newer vehicle, like a 2022 Jeep Cherokee Trailhawk, the odometer will not count the miles. I would be happy to recommend a flat towing set up for your Trailhawk along with the Tow Bar and Braking System you have…

view full answer...

Answer 3

The RV service rep was not speaking the truth. The SMI Stay-IN-Play DUO Supplemental Braking System #SM99251 can be removed and installed on another vehicle. You simply need to remove the parts from the vacuum lines and replace with couplers and…

view full answer...

Answer 4

Hey Dan, For a 2022 Jeep Cherokee Trailhawk you would need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights #RM63MR. Your vehicle should be equipped with ParkSense proximity sensors and would have variable…

view full answer...

Answer 5

We have all of the parts you are needing. First things first you will need to add a base plate kit to your 2021 Jeep Grand Cherokee Trailhawk 4WD. I recommend the Roadmaster Direct Connect Base Plate Kit #RM-521451-5 due to it having removeable arms…

view full answer...

Answer 6

The Falcon All-Terrain Tow Bar #RM-522 that we offer doesn't come with safety cables included so I don't know the exact length that you have, but we tend you usually need to add on quick links, like part #37201345, whenever a high/low adapter…

view full answer...

Answer 7

The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BV0554-01 for white, or #BV0554-03 for smoke. I have attached a couple of videos for you to…

view full answer...

Trouble Removing Front Bumper Fascia On a 2019 Jeep Cherokee

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching