How to Update Superchip F5 # SU1845 for 2016 F-250 Diesel

Question

Question:

Where do I get a tune for this so I can use on my d 2016 F-250 with 6.7 Power-stroke? I am using a Superchip F5 1845 now with all stock exhaust and havent removed EGR yet.

asked by: Robert W

0

Expert Reply:

In order to update your Superchip F5 # SU1845 to be used on your 2016 Ford F-250 6.7 Diesel you will need to connect it to your computer via a USB port and it will update any information for your vehicle via the internet and then allow you to adjust your performance settings.

expert reply by: Erik B

0

Answer 1

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

view full answer...

Answer 2

I can definitely clarify things for you. With the Superchips Flashpaq F5 #SU1545, this device is designed to help calibrate your large after market tires, to read clear trouble codes, adjust your TMPS, and adjust your speed limiter. It does not…

view full answer...

Answer 3

Your 2021 Ford F-150 is going to require the Superchips Flashpaq F5 Pro Custom Performance Tuner #SU1545 as long as you do not have a diesel engine. Your Jeep JK used a different Tuner #SU3571 and cannot be reprogrammed for your F-150.

view full answer...

Answer 4

Hey Don, we have the Firestone Coil Rite part #F4169 for your 2019 Dodge Grand Caravan which is a great option for additional suspension support. It's also the only fitting option we have for your vehicle as well. But the compressor kit part…

view full answer...

Answer 5

For your Edge Evo HT 36030, I recommend using the same setting as you would for any of the tuners when hauling a load. I recommend using the "Tow" setting for light load tow.

view full answer...

Answer 6

Your Edge EvoHT2 #EP36040 is also a confirmed fit for your 2001 Dodge Cummins. This controller is only able to be used on one vehicle at a time, so setting that tuned vehicle back to stock will allow it to be used on another vehicle. Since he said he…

view full answer...

Answer 7

I have a solution for you, but the Edge Module part #EZD1000A is not a fit for the 2005 Dodge Ram Cummins. Instead you would want the #EP36040 if you have the 325 horsepower Cummins or the part #EP30204 for if you have the Common Rail 24 valve that…

view full answer...

Answer 8

I checked out the installation instructions for the EvoHT2 Tuner, part #EP36040 and found that on page 18 it is explained how to return the engine tuning to stock. From the main menu you will need to select 'Tune Vehicle'. Then select…

view full answer...

How to Update Superchip F5 # SU1845 for 2016 F-250 Diesel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching