Correct Happijac Tie Down Kit for 2011 Ford F-250

Question

Question:

What is the correct happy jack kit or front and back parts for a 2011 Ford F250. Are there and steak pocket tie downs that would fit this truck? The steak hole tie downs would be preferred but we already tried part #TDSF but they are to big. Thanks

asked by: Joe B

0

Expert Reply:

I checked with Happijac and the kit you need for your 2011 Ford F-250 is the part # LC182910-182971 for the tie downs and then for the turnbuckles # LC182897.

This is a much better setup than a stake pocket attachment for a camper so I would not recommend the stake pocket route. It's much more secure and much more stable.

expert reply by: Jameson C

0

Answer 1

The stabilizer bar and brackets will be bolted inside the bed and the front anchoring plate will be bolted on between the bed and the cab. If you don't have enough space to get your hand and the plate between them then you'll have to unbolt…

view full answer...

Answer 2

We do carry the Replacement HappiJac Rear Tie-Down #LC182866 for the HappiJac Camper Tie-Downs #LC182910-182971 which fits your 2015 Ford F-250. We also carry the Replacement Anchor Plates #LC182876 and Stabilizer Bar #LC182971 depending on what…

view full answer...

Answer 3

Hey Scott, so the HappiJac Truck-Mounted Camper Tie-Downs item #LC182910-182971 actually does not have any weight capacity because they are designed to handle the weight of any truck bed camper. This also applies to any camper tie-down, which is why…

view full answer...

Answer 4

The correct rear sway bar for your 2013 Ford F-350 SRW 4x4 is the Roadmaster part #RM-1139-173-00 that you referenced. This was designed for trucks like yours that do not have the factory sway bar and will do a great job improving the handling and…

view full answer...

Answer 5

The correct frame mounted tie downs for your 2012 Ford F-250 short box are the HappiJac Truck-Mounted Camper Tie-Downs #LC182910-182971 which work as long as you do not have a Torklift aftermarket hitch. This includes: - (2) Front anchor plates - (2)…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Do you have a crew cab or a regular cab? Torklift is really particular with their fits but with that last bit of info I should be able to see what solution would work.

view full answer...

Answer 10

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…

view full answer...

Answer 11

Hi Thomas, Appreciate that info, and we do have the right TorkLift camper tie-downs for your 2023 Ford F-350 with an 8 foot bed and the factory hitch. The correct tie-downs for your truck are the following: - TorkLift Tie Downs - Custom Frame Mount -…

view full answer...

Answer 12

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Correct Happijac Tie Down Kit for 2011 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching