Replacement Spring Latch for Ramp on Shadow Horse Trailer

Question

Question:

Hello, I was looking for a replacement part for my shadow horse trailer. The piece that holds the ramp up has completely come off. I’m looking for the spring load and the piece that attaches to the trailer. Do you know who I could contact to get this replacement? I have the measurements if needed. Thanks

asked by: Emily

0

Expert Reply:

Based on the photos I've seen online for Shadow Horse Trailers, it appears you are looking for the Bolt-On Stainless Steel Spring Latch # SL716SS. I've attached a video of this product as well as photo of the dimensions to further assist. I've also linked the page to all your spring latch options to assist if these measurements don't match.

expert reply by: Jason S

0

click to enlarge

Answer 1

I don't believe we have an exact match but we do have pins that you could potentially retro-fit to your trailer such as #F719-182Z104. The benefit of this design is that you can't lose the pins. I have included a link below to this and other…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The 4-3/4 inch wide front tires of your scooters would be perfectly compatible with the Tow-Rax #TWSPWC wheel chock. The chock includes hardware for mounting the chock to a wood floor, for a metal floor you'd need the #TWSPWFKM mounting hardware.…

view full answer...

Answer 5

For the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter, the kingpin coupler set screws, please note the linked instructions below.

view full answer...

Answer 6

We offer break away systems from Hopkins and Tekonsha. Tekonsha uses glass mat batteries, while Hopkins uses gel filled batteries. Both types of batteries are sealed, and both manufacturers tell me that the batteries can be installed in any…

view full answer...

Answer 7

The first thing you will need to do is ensure the breakaway pin is attached and the battery is fully charged. If you do not have a breakaway kit or the pin is still attached, please disregard. It sounds to me like the left side of your trailer's…

view full answer...

Answer 8

We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas…

view full answer...

Answer 9

There is no standard for these vehicles, but we have found that the pigtail location on a Chevy Express should be taped and tucked under the driver side floor mat up towards the firewall. It may also be under the dash but near the emergency brake…

view full answer...

Replacement Spring Latch for Ramp on Shadow Horse Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching