Recommendation for Adding Third Axle To Trailer Suspension
Products Featured in This Question
Question:
I’m not really new at this,this is the third time I’ve done a triple axel change over but the first time for 35 inch spacing. the correct spacing for the hanger spacing is 30 1/2 x 35 back to 30 1/2 using a kit number K 71 453 not the 360 information was hard to fine but this is the correct setting
asked by: Larry B
Expert Reply:
The Dexter Heavy Duty Suspension Kit # K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've attached an article to help with the proper positioning of your axles.
You will need to add another equalizer of the same dimension as you have to each side and then add the same leaf springs and shackle straps as what you currently have. You will use the same hanger as your front hanger for your rear hanger. Without knowing what you have, it would be really difficult to duplicate. You may want to consider just using a kit like the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center # APTT5 and the difference in your spring length will account for the difference.
For your leaf springs, you can use the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # e94SR.
I've attached the 5,200 lb axle options we carry to assist with the hub face to hub face length and the spring seat to spring seat measurement on center.

Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Shop: Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Search Results: trailer leaf springs
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs
- Video: Hands-On with the Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers
- Q&A: Should 7,000 Pound Axles be Upgraded to 8,000 Pound Axles on 2018 Grand Design Momentum 351
- Search Results: lippert air ride
- Search Results: trailer axles
- Shop: B&B RV Heat Vent w/ Rotating Grille - Damper for 4" Duct - 4-1/8" Diameter - Black
- Q&A: Parts Needed To Convert Tandem Axle Trailer To Triple Axle
- Shop: 4-Leaf Double-Eye Spring for 5,200-lb Trailer Axles - 25-1/4" Long
- Q&A: Recommended Leaf Springs and Equalizers for Triple Axle Trailer With Double Eye Springs
- Q&A: Will Dexter Heavy Duty Triple Axle Equalizer Kit Fit 2008 Weekend Warrior 300FS
- Search Results: k71~453~00
- Shop: Suspension Enhancement
- Q&A: 3rd Axle Addition on Fifth Wheel Toy Hauler
- Video: In-Depth Review of the Dexter E-Z Flex Suspension Kit
- Search Results: air bags
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Search Results: 5th wheel pin box
- Search Results: fifth wheel king pin
- Video: Complete Breakdown of the B and B RV Heat Vent w/ Rotating Grille
- Article: Where to Position the Trailer Axle?
- Video: Hands-On with the Lippert Center Point by Trailair Air-Ride Suspension Upgrade
- Video: Feature Breakdown: Lippert Center Point by Trailair Air-Ride Suspension Upgrade
- Q&A: Parts Needed to Upgrade From 7K to 8K Axle and Convert to Electric Over Hydraulic Brakes
- Shop: Trailer Wiring
- Q&A: Lug Nuts for 7K Dexter Axle
Larry
6/11/2018
I’m not really new at this,this is the third time I’ve done a triple axel change over but the first time for 35 inch spacing. the correct spacing for the hanger spacing is 30 1/2 x 35 back to 30 1/2 using a kit number K 71 453 not the 360 information was hard to fine but this is the correct setting