Transferring a Trailer Hitch From a 2008 Honda Odyssey to a 2012 Honda Odysssey.

Updated 03/01/2018 | Published 02/27/2018

Products Featured in This Question

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(468)

$61.61

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(1851)

$197.74

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(354)

$52.89

Question:

I purchased a Draw-Tite hitch for my wife’s 2008 Honda Odyssey back in 2016 to replace one that had been damaged in a minor accident. We just purchased a 2012 Odyssey. Can I swap the hitch from the old van to the new one? In looking at new hitches, it appears they are the same part number for both model vans. I know I’ll need to get a new wiring harness.

asked by: Robert H

Expert Reply:

Both Draw-Tite Trailer Hitches, part # 75270 and # 36417, are compatible with the 2012 Honda Odyssey. I recommend checking the bolts and bolt holes for wear prior to transferring to the 2012, and ensuring that there isn't any damage, cracks or severe rust on the hitch.

For a wiring harness, I recommend Curt's T-Connector, part # C56378. This installs into the existing wiring in your taillights to quickly add a 4-pole connector. I've included a video of the Tow Ready kit, part # 118521 being installed on a 2012 Honda Odyssey so you can get an idea of how to install it on your new vehicle.

expert reply by: Jacob W