Recommended Non-Slip Tread for Ramp Door Traction

Question

Question:

Do you have some grip tape that would help my motorcycle from slipping when driving up rear ramp door??

asked by: Anthony D

0

Expert Reply:

We do have grip tape like # CAM25401 or wider and glowing # LC379600. We also have the 6 x18 inch # NSWS. Because you are using them on your ramp door for your motorcycle, you may want to consider the Erickson Tough Tread Strips - Stick On - 4" Wide x 17-1/2" Long - Qty 2 # EM08010 which will provide a different kind of non-slip tread.

I've attached some video reviews to assist.

expert reply by: Jason S

0

Answer 1

You can absolutely use a battery in your trailer to do all the things you desire. You will simply want to get a deep cycle battery and get the amp hour rating you desire. I recommend using the Redarc In-Vehicle BCDC Battery Charger - Dual Input - 25…

view full answer...

Answer 2

So it's going to be quite a bit. What you're going to need is to convert your trailer to a 7-way with a junction box #38656, and then use a DC to DC charger like the Redarc In-Vehicle BCDC Battery Charger - Single Input #RED96FR to use the…

view full answer...

Answer 3

The etrailer Trailer Wheel Lock, part #288-02020, will fit your UTV provided its tires are between 6-3/4" -10-1/2" wide. Another option is the Trimax Trailer Wheel Chock and Lock - 12 - 16-1/2" Wide Tires, part #TMX62ZR, which can fit…

view full answer...

Answer 4

Not that one Scott, but I have one that will. The UWS Truck Bed Fender Well Toolbox item #UWS01624 is too tall at 23-1/4". To keep below your bedsides you'll need to use the DeeZee Specialty Series Passenger's-Side Wheel Well Tool Box…

view full answer...

Answer 5

Hey Tim, The adapter rails for GM's towing prep package that your SuperGlide #PUL63RR will mount to are under part #PUL69RR (4452).

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Jacques, thanks for reaching out! The Redarc Tow-Pro Liberty #RED52VR will work just fine on your 2023 Ford Ranger, and it will install by splicing into a bundle of wires under your driver side dash. We have a video of this same process of the…

view full answer...

Answer 8

Using the cut off wiring harness you have for the P3 part #90195 you will wire it to the brake controller wiring of your 2023 Ford Ranger which is sticking out of the large wire harness that goes through the driver's side firewall, left of the…

view full answer...

Answer 9

It's the same harness for both. That's just how its categorized on our website. To add a 7-way to your 2023 Ford Ranger you will want the Curt T-Connector Vehicle Wiring Harness item #C56431. This custom-fit T-connector plugs into your…

view full answer...

Answer 10

For your 2018 Nissan Titan XD I recommend the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The kit comes with 4 quick mount legs that mount in the track system of your XR tonneau and…

view full answer...

Answer 11

Yes you can certainly install a 59" crossbar setup such as Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" Long #Y02-490B-NT onto your RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black -…

view full answer...

Answer 12

The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs #AP233 is the standard suspension kit. For a heavy duty option, we have the Dexter Axle Heavy-Duty Suspension Kit for Tandem Axle Trailers - 1-3/4" Double Eye…

view full answer...

Recommended Non-Slip Tread for Ramp Door Traction

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching