Spindle Dimensions of a 3500 lb Axle
Updated 07/06/2020 | Published 01/20/2018
Question:
Need to know the size of the axle spindle where the lug hub slides on with bearings on a 2004 Branson care trailer. Axle is a 3500 lb with a 5 lug rim, tire is 205 75 D15
asked by: Jeff
Expert Reply:
3500 lb axles have the most common and most consistent spindle sizes. They are typically 1.73 inches at the seal, 1.38 inches at the inner bearing and 1.06 inches at the outer bearing like # TRU24FR. I've attached a video to assist.
I've linked the page to all of the options for hubs or hub/drum assemblies for this size spindle. There are 4 different sizes for 5 bolt assemblies and I've attached an article to assist.
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake actuator
- Search Results: trailer leaf springs
- Search Results: trailer bearings races seals caps
- Search Results: trailer tires and wheels
- Search Results: trailer hubs and drums
- Search Results: disc brakes trailer brakes
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle
- Search Results: 3500lb hub
- Shop: Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Video: Review of Taskmaster Trailer Tires and Wheels - Tire with Wheel - TA39AR
- Video: Review of Taskmaster Trailer Tires and Wheels - Tire with Wheel - TA77AR
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Suspension Kit for Tandem-Axle Trailers Feature Review
- Video: Detailed Breakdown of the Shackle Bolt with Locknut For Double-Eye Springs
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Q&A: Comparing Bronze and Nylon Bushings for Trailer Suspension
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter BrakeRite Electric Over Hydraulic Actuator for Disc Brakes - Vented - 1,500 psi
- Q&A: Adjusting Electric Brake Assemblies on Trailer Drop Axle
- Article: Where to Position the Trailer Axle?
- Video: Review of Taskmaster Trailer Tires and Wheels - Aluminum Wheel Only - TA64XR
- Q&A: What Size Rim is Needed for 205/75R14 Trailer Tire
- Q&A: Can Brakes Be Added To An Enclosed Trailer With A 3,500lb Axle
- Q&A: Using Demco DA70 Actuator For Drum Brakes With Disc Brakes
- Shop: Brake Controller
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
on Trailer Spindles
Gord
6/23/2020
Wondering if anyone still uses 1.5" x 1.375" spindles? I'm looking for bearing/hub assembly for an axle I currently have but seems like these dimensions are no longer used? Would you have any leads on where one could find some (perhaps old) stock in these dimensions?