Replacement Fulton Landing Gear Lead Leg Needed

Question

Question:

im looking for a lead leg to replace my broken fulton landing lead leg that is on our 2003 cedar creek 5th wheel. can you tell me what I would need? thanks!

asked by: Evan

0

Expert Reply:

Since we do not currently carry any Fulton brands for landing gear, I recommend replacing both legs. Having 2 different brands for your landing gear could result in an uneven leveling experience since their adjustments could be slightly different.

Since Lippert Components plays a huge role in the manufacturing of RV's and trailers I recommend going with either their 6,000 lb Manual Set # LC333966 or the same set that is Electric # LC333964. All you will need to do is make sure that the outside to outside distance of your landing gear brackets are 17-1/2 inches (see attached photo). If that is the case you will not have to modify anything.

If your landing gear brackets have a different measurement just let me know what you have and I will be happy to see if we have any that are compatible.

expert reply by: Jon G

0

click to enlarge

Answer 1

Since you said your gearbox says Venture on it we have just what you need. Since the gears are stripped it would be the best solution to replace the gear box and the motor. Gear box #LG-179015 will fit Venture landing gear jacks and replacement motor…

view full answer...

Answer 2

For your Parallax 555 model there isn't a converter replacement available. You'd have to replace the entire panel with the part #PD4560K18LS8. It does not come with breakers but in manual all of the required ones are listed from different…

view full answer...

Answer 3

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

Answer 4

We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your end.…

view full answer...

Answer 5

The Lippert Electric Landing Gear Set part #LC333964 should be an excellent replacement option for a Forest River Wildcat Fifth Wheel. In order to confirm, simply measure the distance between the weld stops and compare that to the dimensions below:…

view full answer...

Answer 6

I have a solution for your 1996 Avion 5th wheel, however, it is not as simple as getting two new legs. Your Avion was manufacturered by Fleetwood and the landing gear was manufacturered by RBW. Fleetwood discontinued the Avion and RBW sold out to…

view full answer...

Answer 7

You should need repair kit #LG-146059 for the lead leg and #LG-146060 for the follower leg. From the picture you sent in I was able to determine that you have a Venture landing gear set VMC900R.

view full answer...

Answer 8

Although I don't know exactly what landing gear you have on your 2006 Big Horn, I can help you find some replacement landing gear. The part VMC900L-181526 that you referenced looks to be some Venture landing gear from the first digits…

view full answer...

Answer 9

The part #RVLG-8000 is going to work well for you since you said the dimensions are the same. The motor kit for this set is part #LC142178 and although it may mount differently it will work. The big thing with these kits is the dimensions matching…

view full answer...

Replacement Fulton Landing Gear Lead Leg Needed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching