Bearings and Races for 7,000 Pound Trailer Axle
Updated 12/07/2024 | Published 05/08/2017 >
Products Featured in This Question
Question:
What are the bearings and seals for the Dexter 7000# easy lube axle?
asked by: Beau B
Expert Reply:
The most common bearings and seals for a 7,000 pound axle are # 25580 inner bearing, # 14125A outer bearing, # 25520 inner race and # 14276 outer race. The grease seal can vary, and will usually either be the # GS-2250DL, which has a 2.250 inch inner diameter and 3.376 outer diameter, or # GS2125DL with a 2.125 inch inner diameter and 3.376 inch outer diameter.
We do also offer complete bearing kits for this axle. For the GS-2250DL grease seal, you can use the Kit # BK3-200. For the # GS-2125DL grease seal, you will use Kit # BK3-210. These kits include the bearings, races, grease seal and cotter pin.
I recommend pulling your hub and verifying these numbers as there is still a possibility that yours may be different. The bearing numbers should be stamped onto the bearings themselves, or you can measure the spindle at various locations if these cannot be found. I have attached an image that shows these measurements.
I have also included an article on trailer wheel bearings that you may find helpful.

Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Search Results: bk3~200
- Q&A: Replacement Bearings & Grease Seal Kit For 7,000 lb & 8,000 lb Lippert Axle
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: morryde alltrek 4000
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Grease Seals 10-36 (pair)
- Search Results: trailer bearings races seals caps
- Search Results: trailer wheel bearings
- Shop: Grease Cap, 2.72" OD Drive In with Plug - Qty 2
- Shop: Viair Ultra Duty Onboard Air Compressor with 2.5 Gallon Tank - 200 psi - 1.86 cfm
- Q&A: Determining Correct Replacement Bearing Kit For Dexter 7000lb Axle
- Q&A: Replacement Bearings for a Dexter 7,000 lbs Axle and Wet Bolts for a Morryde CRE 3000
- Search Results: grease cap
- Search Results: dexter dust cap
- Q&A: Replacement Bearing Kit For Dexter 6,000 lb Axle 2266389
- Search Results: ez lube dust cap
- Q&A: Looking For Bearing Kit For 2017 Jayco Northpoint With Lippert 7K Axles
- Q&A: Bearings, Seal and Brake Soes for 2016 Forest River Sierra with 7k Dexter Axles
- Q&A: Recommended Trailer Wheel Bearing Grease for Dexter Axles
- Video: Review of Timken Trailer Bearings Races Seals Caps - Bearing And Race Kit - TMK32VR
- Video: A Closer Look at the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Video: Viair Ultra Duty Onboard Air Compressor Installation - 2018 Ford F-350 Super Duty
- Video: All About the Grease Seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Abe H.
12/7/2024
Will these axle bearings work on a 2015 Solitude 379FL?