Selecting Solera Slide Topper For Rockwood Mini Lite 2503S

Question

Question:

which solera slide topper would you recommend for a rockwood mini lite model 2503s

asked by: Jim L

0

Expert Reply:

You will need to take a quick measurement of the width of your slide box to make sure you get the right topper. You will need a topper that measures 2-1/2 inches beyond each side of the slide box.

For example, the 13-ft Solera Slider # LCV000165061 is 156 inches wide and will work with a slide box from 146 to 151-3/4 inches.

I have attached a link to the Solera Slide Toppers we offer. You can select the right topper by color and size or let me know what color you would like and what the width of your slide box is and I will be glad to make a recommendation that will work for you.

expert reply by: Jeffrey L

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 2

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 3

I appreciate that measurement, and we do have a slide topper for your 2022 Grand Design Imagine 2600RB with a slide box that measures 147 inches, and you can choose from either Black or White in color: - Black: Solera RV Slide-Out Awning -…

view full answer...

Answer 4

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 5

Hey Robert, thanks for reaching out. You asked a good question so I went ahead and ran that by my contact at Bauer. They said the Bauer NE RV Entry Door Lock #BA53UR can be programmed with up to 256 entry codes. I hope this helps and let me know if…

view full answer...

Answer 6

Measuring to pick out the correct slide topper for an RV like your 2018 Forest River Rockwood is pretty easy. You have to measure the box width including the flange on it and you'll be set. So the Solera part #LCV000163288 that you referenced is…

view full answer...

Answer 7

Hey Patrick thanks for bring that up! I checked with Curt, unfortunately you can not use the CrossWing with the Rota-Flex. To use this hitch with the Rota Flex pin box, you'd have to lockout the pin box. If there is anything else you have…

view full answer...

Answer 8

You do need 6 inches of clearance from the edges of your slide box in order to fit a Solera awning. To determine the correct slide-out awing you simply need to measure from flange to flange and the fabric will need to extend at least 2-1/2 inches…

view full answer...

Answer 9

I'm not seeing a trustworthy source for any dimensions so you would need to remove any trim over the front of your Apollo microwave and measure the cutout space in order to see what could potentially fit. The High Pointe line we offer has a…

view full answer...

Selecting Solera Slide Topper For Rockwood Mini Lite 2503S

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching