How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
Question:
I need both hubs for the above camper. Fleetwood Destiny Parts list says the hub part # is 4738D0451 Seal # 4714A2201 bearing and race pkg # 4716-1101 Axle shaft is 1 1/16inch dia. 7/8inch of thread then 3 1/4inch to lip which is 1 1/2inch dia by 1/2inch long It is a 5 Lug 4.5 on ctr Hub has markings of HA 908 and G4 1492 Gross camper weight is 1875# Axle tag says 1800# will your part number AKIHUB-545-2-1K work?
asked by: Jeff G
Expert Reply:
To select a set of replacement idler hubs for your Fleetwood Destiny trailer you want to match up a few characteristics from your originals. These include the axle weight capacity, wheel bolt pattern and the bearing set used in the hubs. A replacement hub must use the same inner and outer bearings as the original in order for it to fit on your spindles.
The linked page displays 5-on-4-1/2-inch bolt pattern idler hubs for 2K axles. Hub # AKIHUB-545-2-1K works with wheel diameters from 8- to 12-inches and uses bearing L44643 as both its inner and outer bearing. The linked photo shows you the usual appearance of bearing numbers.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ez lube grease cap trailer bearings races seals caps
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Search Results: ez lube
- Search Results: ez lube trailer hubs and drums
- Search Results: easy grease
- Search Results: wheel bearing kit
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Bearings, Races, and Grease Seal Recommendation for a 1995 Coleman Stoney Pop Up
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Recommended Tires For 1994 Coleman Destiny Cedar XL With 5.30x12 Tires
- Search Results: spacer block
- Search Results: 26 inch leaf springs
- Q&A: Replacement Wheels and Tires For a 1994 Coleman Pioneer Arcadia Pop Up Camper
- Shop: RV Bearing
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Article: Where to Position the Trailer Axle?
- Q&A: Comparing a 5.30x12 and 5.70x8 Trailer Tire
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Q&A: Where Does Red Wire of 4-Way # 62990 Wire To on Trailer
- Q&A: Where do Trailer Wire Colors Green, Yellow, Brown and Red Run To
- Video: Ultimate Overview of the Trailer Idler Hub Assembly for 2K Axles
on Trailer Hubs and Drums
Alex S.
7/16/2020
Just looking to see what size wheel bearings I need for my 98 Coleman pop-up tent trailer Fleetwood Casa Grande