Hitch Fit for Rear of Rockwood ROO 23IKSS

Question

Question:

I have a rockwood roo 23ikss. I beam with stabilizers on the end. DO you have a hitch for this model?

asked by: Al

0

Expert Reply:

The Curt Hitch part # 13703 would be the best option we offer as it can fit I-beam trailer frames that are between 22 and 72 inches apart outside to outside.

I attached an install video for the hitch as well. This would need to install on the I-beam portion of the frame and not on the bumper stabilizers.

expert reply by: Jameson C

0

Answer 1

Each bulb should have a power wire and a ground wire. As you can see in the diagram I provided, one lead of the resistor is tapped into the power wire, and the other lead of the resistor can either ground to the vehicle or tap into the ground wire…

view full answer...

Answer 2

Installing load resistors on the trailer's wiring like the #DI34ZR will prevent the flickering of the taillights if you wanted it to stop. If you can live with the flickering though there's no reason you'd have to do this. The flickering…

view full answer...

Answer 3

The Curt Adjustable Width Trailer Hitch Receiver #13703 referenced in your question is a universal type hitch that is designed specifically for RVs and trailers like yours. It will fit frame widths of 22 to 72 inches and work on box, C-channel, and…

view full answer...

Answer 4

For your 2024 Chevy Silverado 1500 I recommend the Redarc Tow Pro Elite #RED63RR. You can use it along with the Plug in Adapter #3064-P for a plug and play install, since you already have the factory tow package. The Redarc controller is going to be…

view full answer...

Answer 5

Hey Tom, yes that is correct you would need to use the spacer kit part #AL52420 with the Air Lift LoadLifter part #AL88288 on your 2024 Chevy Silverado 1500 based on the dimensions you measured since you have the Eibach lift kit. Will you be doing…

view full answer...

Answer 6

Hello David, thanks for getting in touch. The 2019 GMC 1500 AT4 has a 2" lift, and the #AL88388 kit you mentioned has taller brackets to fit the 2" lift. I looked up the X31 model and it does say it has offroad suspension, but it didn't…

view full answer...

Answer 7

The Timbren Suspension Enhancement System #T28MR is the kit which will fit your 2024 GMC Sierra 1500. Do understand this is a very heavy duty spring with a weight capacity of 8,600lbs. This will most likely give you a less than desirable ride…

view full answer...

Answer 8

The SumoSprings Solo Custom Helper Springs #SS45FR and SumoSprings Solo Custom Helper Springs #SS65FR both have the same fitment but have different weight capacities. The #SS45FR is rated for 1,500lbs while the #SS65FR is only rated for 1,000lbs.

view full answer...

Answer 9

For a set of air springs I recommend checking out the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88288. These springs have a load leveling capacity of 5,000-lbs, an adjustable air pressure range of 5 to 100…

view full answer...

Answer 10

Hey Terry, thanks for reaching out! There are a few different options for your 2023 Chevy Silverado 1500 ZR2 but the correct kit just depends on how you're using the truck. The Air Lift LoadLifter 5000 kit is the only air bag kit designed to fit…

view full answer...

Answer 11

Personally, I have seen a lot fewer issues with the Redarc Tow-Pro Liberty #RED24FR than with the Curt Spectrum #C51170. The Spectrum was released in early 2018. Currently Redarc only offers the one size control knob. To install the Redarc Liberty…

view full answer...

Answer 12

The Timbren Suspension Enhancement item #T28MR and the RoadActive Suspension item #RAS54FR can both be used in tandem on your 2021 Silverado 1500 but I wouldn't recommend it. The Timbrens are great to reduce sag but they only engage when your…

view full answer...

Hitch Fit for Rear of Rockwood ROO 23IKSS

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching