Can the Trailer Valet XL Trailer Dolly be Used to Push or Pull a Trailer

Question

Question:

Can I use this to pull instead of just push my trailer? For example if I want to pull it 10 feet forward instead of pushing it 10 feet backward.i

asked by: JEFF T

0

Expert Reply:

Yes, the Trailer Valet XL dolly # TVXL2 is actually designed to pull the trailer as well as to push it so it will work just like you want it to! This version has a 2 inch ball. There is also a version with a 2-5/16 inch ball # TVXL25. I have linked a video showing how these dollies work.

expert reply by: Michael H

0

Answer 1

Trailer Valet will officially state that the #TVXL2 should only be used on concrete/asphalt and not on gravel or dirt applications since like you have found out the traction just isn't good enough and the wheel will spin. So while there isn't…

view full answer...

Answer 2

You wouldn't want to try and move a trailer up an incline with the MT70881. The dolly itself would be fine but you would most likely not be able to pull that heavy of a trailer up an incline. And then if you somehow did get it going up the…

view full answer...

Answer 3

I was able to identify your axle thanks to the tag you sent in and Dexter's help and found that the lift kit you'd need would be the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01.

view full answer...

Answer 4

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball #TVXL25 actually has a 10,000 lb trailer weight capacity and 1,000 lb tongue weight capacity. It is very likely that your 20 foot travel trailer will have a weight that is…

view full answer...

Answer 5

First of all, thank you very much for your service, and thank you for providing an entertaining read. Using a tow dolly instead of your current trailer jack will definitely help make moving your loaded boat trailer much easier. We do have options…

view full answer...

Answer 6

Hello Tom, Thank you so much for the detailed information, especially having the Cat Scale weight so we know how your weight is distributed. I wish every customer was as thorough as you are. I really like the Equal-i-zer system that you have been…

view full answer...

Answer 7

Yes. The only difference between the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 and the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 1,000 lbs TW #TVXL2 is the hitch ball…

view full answer...

Answer 8

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 9

The crank handle of the Trailer Valet XL Trailer Dolly #TVXL25 can be spun in either direction so it could push or pull a trailer if needed. In either direction it works just as good.

view full answer...

Answer 10

Hello Tom, Congrats on the new 2025 heartland corterra 3.0 5th wheel, what is your favorite feature? I cannot find the exact weight anywhere for the Stackers StayPut Jack Pads and Leveling Blocks #VAL93MB. I do know that they will be able to handle…

view full answer...

Answer 11

Hey Bruce, I have not personally heard of that but I did go ahead and check out the instructions to see if anything like that was mentioned. What I think is happening is you have your chains adjusted up too high. Curt specifies that the Curt Round…

view full answer...

Answer 12

Hey Mark, the oscillating vent of the Furrion Chill Cube #FR27TD points to the front. Is there anyway you could use it pointing forward?

view full answer...

Can the Trailer Valet XL Trailer Dolly be Used to Push or Pull a Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching