Is a Wiring Harness Required for Trailer Lights or Do They Come With a Trailer Hitch
Question:
Will I need an electical pigtail, is it required. I dont have a trailer yetshould I wait until I purchase my trailer?
asked by: Corey
Expert Reply:
The wire that you see in the pictures for the Curt Trailer Hitch, # C11290, is called a fishwire or bolt leader. It is used to pull bolts and other hardware needed for hitch installation into place in hard to reach or otherwise inaccessible places on the vehicle frame. I have included a link to the installation details for this hitch below.
The Curt Trailer Hitch, # C11290 will allow you to tow a trailer but you will need a separate wiring harness to power the lights on the trailer. The most common harness is a 4-Flat. This is what you will find on small trailers that do not have electric brakes but do have brake lights, running lights, and turn signals. Trailers that have electric brakes will be equipped with a 7-Way. Even if a 7-Way is required by the trailer, you will still have to install a 4-Flat first. I have included an FAQ article with information on the various style harnesses and their functions.
Wiring harnesses are mostly vehicle specific though some harnesses can fit on more than 1 vehicle. To find the correct wiring harness, I will need to know the year, make, and model of your vehicle. You will need to have the wiring ready to go on the tow vehicle before bringing the trailer home so once you find the trailer you want, check what kind of wiring harness it requires before buying it.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Which is Better Hitch for 2022 Hyundai Venue Curt or Draw Tite
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Article: Trailer Wiring Diagrams
- Search Results: draw~tite trailer hitch
- Video: The Low-Down on the Curt Class II Drawbar
- Video: Complete Breakdown of the 2" Hitch Ball-A-82
- Video: How to Install: Draw-Tite Sportframe Trailer Hitch Receiver on your 2024 Hyundai Venue
- Q&A: Recommended Trailer Hitch 2022 Hyundai Venue
- Q&A: Does Trailer Hitch For 2024 Hyundai Venue Have Concealed Crosstube
- Q&A: Recommended Hitch for a 2023 Hyundai Venue
- Q&A: Trailer Hitch Receiver Fit on 2020 Hyundai Venue
- Q&A: 2022 Hyundai Venue Trailer Hitch that Does not Require Heat Shield Modification
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span
- Video: Best 2018 Chrysler Pacifica Trailer Hitch Options
- Q&A: Should Trailer Wiring Be Installed with Trailer Hitch or Can it Wait til Later
- Shop: Brake Controller
- Search Results: velcro bike rack straps
- Search Results: velcro
- Search Results: velcro straps
- Search Results: straps
- Search Results: tie down straps
- Search Results: utility straps and cords
- Video: Finding the Right Trailer Wiring Harness
on Trailer Hitch
