Which is Better Hitch for 2022 Hyundai Venue Curt or Draw Tite

Question

Question:

It looks like you offer two different hitches for the 2022 Hyundai Venue. The Draw Tite DT24MR and the Curt C57CR Any preference between the two, or just flip a coin?

asked by: Erik M

0

Expert Reply:

Both the Draw Tite # DT24MR and the Curt # C57CR are great hitches for your 2022 Hyundai Venue but the better option is the Curt as it does not require fascia trimming like the Draw Tite does. Aside from that you wouldn't notice much of a difference between install or use of either.

expert reply by: Jameson C

0

Answer 1

As you can see of the photo I added for you, the crosstube will be totally concealed on your 2024 Hyundai Venue after installing the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C57CR I also wanted to add,…

view full answer...

Answer 2

The wire that you see in the pictures for the Curt Trailer Hitch, #C11290, is called a fishwire or bolt leader. It is used to pull bolts and other hardware needed for hitch installation into place in hard to reach or otherwise inaccessible places on…

view full answer...

Answer 3

Yes, there is a hitch available for a 2023 Hyundai Venue. It is the Curt Trailer Hitch item #C57CR. This hitch is custom fit and bolts to your Hyundai with included hardware. The Curt Trailer Hitch item #C57CR is a class I hitch with a 1-1/4"…

view full answer...

Answer 4

The Curt hitch part #C57CR that you referenced does not require modification of the heat shield to install on your 2022 Hyundai Venue unlike the Draw Tite part #DT24MR that also fits your vehicle. So if you were looking for a hitch that does not…

view full answer...

Answer 5

Yes, we do have a hitch for your 2022 Hyundai Venue. I suggest the Curt Trailer Hitch Receiver, #C57CR. This is an easy bolt-on install. It is a class I rated hitch, 1-1/4" receiver opening and can be used for both towing as well as bike racks…

view full answer...

Answer 6

You'e in luck as there is a trailer hitch receiver that is a fit for a 2020 Hyundai Venue, which is the following: - Curt Trailer Hitch Receiver #C57CR This is a Class I hitch with a 1-1/4 inch receiver, and is a complete bolt-on installation…

view full answer...

Answer 7

Hey Ralph, we haven't had the chance to install the Curt trailer wiring harness part #C89CR on a Hyundai Venue like your 24' so we don't have an install video yet but in meantime I attached a link to the install instructions which are…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Which is Better Hitch for 2022 Hyundai Venue Curt or Draw Tite

Products Featured in This Question

Continue Researching