Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
While we do not have the technical drawings of the Firestone Heavy Duty Air Compressor #F9499 I can tell you the dimensions. This unit measures 8" long, 3.94" wide, is 6.3" tall, and has a maximum PSI of 150 PSI. Additionally, this…
view full answer...The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 16' Long - Gray #290-46004 would work for your 7' x 16' enclosed trailer, but there is a chance that it doesn't completely cover the bottom of the wheels and tires since it…
view full answer...I have a very high capacity hitch I can recommend for your 2005 Ford Excursion, but the Curt part #C15410 is not it. Instead you would want the Torklift part #TLF1006 which is a confirmed fit and has a 1,700 lb tongue weight capacity and a 17,000 lb…
view full answer...No problem. If your existing trailer interior lights use a 1-wire hookup this means they use their mounting hardware to make the ground connection and the single lead is the +12V feed. Adding more high-efficiency LED lights with 2 wires will only…
view full answer...Start with mounting a battery. Since the trailer is enclosed, it would be a good idea to mount it on the trailer frame using a battery box like #329-HM318BKS. Next, you will need to have the right kind of connectors on the truck and trailer. I would…
view full answer...E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…
view full answer...You can install a larger tank but that is all based on the space you have in your camper/RV and whether or not you're willing to possibly cut a bigger cutout hole in the wall of your camper/RV. An in stock alternative to the #DMC74FR would be the…
view full answer...You are correct in your description of how to wire in a new auxiliary battery in your enclosed trailer. You will take the 7-Way's 12V power feed and route this to the positive terminal on the auxiliary battery, and you will ground the second…
view full answer...The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…
view full answer...The Brophy D-Ring Tie Down Anchor - Bolt-On #RR05 are rated for 1600 lbs each and will work very well for your 1933 Ford Hotrod. The backing plate is sold separately and is part #BP05. I've attached a photo with the dimensions to assist. Hardware…
view full answer...There isn't a specific height from the trailer floor recommended to mount the E-Track. My gut feeling is that if 3 feet is too low and 4 feet is too high then 3-1/2 feet might be perfect. Another option is to mount E-track pieces vertically along…
view full answer...Thanks for the photo; it looks like you have a low-profile latch and so the Replacement Coupler Cap Spring #BD500354 would work for your coupler.
view full answer...Filter Your Search
Contact and Help