Towing Mirrors that Fit 2006 Toyota Tundra  

The Timbren Suspension Enhancement System - Rear Axle #TFRTT1504E is a confirmed fit for 2015 -2018 Ford F-150 models. It has a lifetime warranty against defects in material and workmanship and is limited to the replacement of the failed part.…

When installing towing mirrors on your 2021 Jeep Gladiator I recommend The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS39NQ. These are a snap on mirror that snap over the backs of your factory side-view…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

Yes, there is! To install the Redarc Tow-Pro Elite Brake Controller item #RED63RR in your 2023 Subaru Ascent you will need the Plug-In Wiring Adapter for Electric Brake Controllers item #3062-P. The brake controller port will be underneath the dash…