Result: steps for truck camper

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

Are you basically asking how much length would this coupler add to the tongue of your trailer?

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

Hey Eric, so to find out if the Lippert Manual Pull Out Steps #LC432682 are going to work with your 2022 Forest River Rockwood Freedom Camper you're going to need to locate the space available underneath your camper that lines up with the door…

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have a…

The 23-5/8 inch width is the widest point and is actually for the metal rod. The bracket width is 22-1/8 inches from edge to edge. I measured this product for you to confirm and have attached a photo to assist.

The Brophy Camper Scissor Steps part #AS24 will require 1-1/4" of clearance between the bottom of the door and bottom of the cab on your Palomino Truck Bed Camper in order for the mounting bracket to attach. If you removed a portion of the trim…

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

The Timbren TFRTT350J will measure 7" from the top of the bracket to the bottom of the rubber spring/jounce. With you having 8-1/2" of space on your 2022 Ford F-250 Super Duty, you will have a 1-1/2" gap between the bottom of the…

The Replacement Jack for HappiJac Truck Camper Jack Systems #LC736515 is a replacement leg for the HappiJac Electric Truck Camper Jack System #LC736515-ELKIT that replaced the 4800 series jacks. These jacks lift 2" taller at 36-1/2" and are…

Are you backing your trailer into the water when the hubs are hot? Typically that's what causes water intrusion into trailer hubs that use oil seals. If the seal can keep oil in without leaks it would be waterproof so the hot hub theory is…

If you are wondering how to lubricate the Bulldog Square Jack #BD182701, that you referenced, then you will simply need to fill it with grease via the grease fittings. If you are referring to an oil bath on your hubs, like the Kodiak XL ProLube Kit…