bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Lincoln
  3. MKX
  4. 2007
  5. Tekonsha
FITS 2007 Lincoln MKX
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118551
Retail:$118.10
Our Price: $74.53
You Save: 37%
Custom Fit Vehicle Wiring
Confirmed to Fit
2007 Lincoln MKX

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 1.67 lbs
Add to cart
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Custom Fit 118551
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Lincoln custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of Tekonsha products for your Lincoln MKX 2007. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118551 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (580)
  • Q & A (0)
  • Photos

2007 Lincoln MKX - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your Lincoln MKX with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points behind tail lights
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite power module that connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.


T-One Connection Location Points Behind Tail Lights

Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed either within your rear cargo area or beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure if you are mounting it near the hitch.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Power Module

A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118551 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118551 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118551

Average Customer Rating:  4.7 out of 5 stars   (580 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:

Sadly the harness quit working after about 6 months. I was really hoping to get a little more life out of the harness.

Etrailer Expert

Jenny N.

2/26/2024

I am sorry to hear thar wiring harness is not working. A lot of the time the ground can because loose and if redone can fix the harness. I have a FAQ below that explains the other options to check with it.



by:
2010 LincolnMKX

The products look good and installed just fine. I towed my boat (about 2,000 lbs) one time with it before I blew the engine on my 2010 Lincoln MKX. My advice is make sure you have a good oil, cooler and transmission cooler and even then you never know with a used car.



by:

Since I'm electronically challenged I am always a bit apprensive when it comes to electrical wiring. After watching your install video it was such an easy thing to do! Plug-n-play! The hardest part was fishing the hot wire up to the battery. (not the wire but getting my body to fit under the car. It took me about 45 minutes from start to finish. I have a small trailer that I will use from time to time so I needed a to install a receiver hitch ( 13650) and wire harness. This fills the bill for me!

Randal

7/14/2020

Still going strong!!



by:
2010 Ford Escape

I purchased this wiring kit along with a trailer hitch and have to say this wiring kit and instructions were real nice. High quality product that went on easily. Took about an hour to install and test. Worked wonderfully and the cost was real competitive. I would highly recommend this product and eTrailer.com for your trailer hitch needs. Great company to deal with from ordering on line to follow-up after the sale, just a great company to work with.

Van J.

6/18/2016

Love the hitch and wiring, use it all the time. Just hauled the trailer 159 miles last weekend and everything works well. Very happy.



by:
2011 Ford Escape

I am new to car mod-ing and are very inexperienced when it comes to knowing exactly what product to get. This is where etrailer was pretty helpful. The videos are very helpful. The hitch was made to fit my specific vehicle (2011 Ford Escape). I also purchased the specific wiring the site said I needed due to having backup sensors on my vehicle.

However, after successfully installing the hitch, we realized there was a problem with the wiring. The yellow/black wires are meant for the driver's side taillights while the green is meant for the passenger. I'm not sure if I was sent the wrong product or if there was a manufacturing error, but the lengths of wire for each were switched.

The shorter length wires should have been the yellow and black while the long should have been green - instead, they were the opposite, as you can see in the pictures. The black box on the right is meant to be housed in the driver side light assembly, not the passenger. Because of this, I was forced to find a long white wire, fuse it with the ground wire that was supplied, and run it back across the width of my vehicle to the factory ground. While it seems like this won't be an issue, it was very annoying having to alleviate this problem.

Everything else seemed to be correct with the wiring and included items, but I would recommend that everyone inspect your order and watch all videos to make sure your product looks to be correct before attempting to install it.



by:
2008 LincolnMKX

Exact fitment of the harness to the lights and the installation was easy. The etrailer.com video was an excellent tool to use as it clarified certain steps in the provided paper instructions......Thanks etrailer.com. The T-one harness is just the opposite wiring set-up of the harness that is used in the video. I was able to use an existing floor body grommet plug to feed the black 12 gauge hot lead wire under the car(I drilled a 9/64th hole in the rubber grommet plug and feed the wire through the drilled hole). Running the hot lead wire to the front of the vehicle took some time (recommend ramps for better clearance). Hook-up of the fuse line and battery connection was elemental. All parts provided make the installation process very easy. The T-one harness is powering the trailer lights perfectly.



by:
2012 Ford Escape

At the same time as buying a hidden hitch, I bought the wiring kit as well. We watched the installation video, which was a big help, but we had to change the threading of the wiring to the front a bit since it wouldn't pass through one of the places shown in the video. Other than that, it went better than any other wiring job we have ever done and looks like a pro did it. We did not leave a pig tail wire to wad up and have to store like it was shown, but made a permanent hook-up at the hitch which looks much nicer.



by:
2010 Ford Escape

Bought with trailer hitch -2010 Escape- Good directions. Installed myself and used setup for 2k mile trip towing a Uhaul rental. Good security having the trailer wireing isolated from the auto circuitry. Web site insured I got the right product.



by:

I will never deal with this company again. Delivery was extremely late. Tracking was impossible to find where it actually was. When I asked to get my money back they said since it was already shipped I had to wait till it arrived and then pay for it to get shipped back. I had to pay for the product to get over the boarder. I will never use this company nor will I tell someone else it's a professional establishment.

Etrailer Expert

Katrina B.

5/22/2023

I am sorry about the confusion. For shipping to Canada, you will have to keep in mind that the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included. All prices on our site are in US Funds. Your credit card company will convert the US charge to Canadian. This should have been stated clearly to you, and I am sorry if it was not. As for the delay in shipping time, if you are needing the product at a specific time frame, you should always use expedited shipping [especially when shipping internationally].



by:

So awsome part came early...box was fine prt was great...part fit great...and it works perfect..thank u very much



by:

Tow hitch for '12 escape. Works awesome! Was tricky to install by myself, but figured out a way(all the videos showed a 2-man install). Easy to wire up. I use it almost daily.



by:
2012 Ford Escape

The kit is actually really easy to install. I was fussing around a little with feeding the wire back to the battery. I watched the video on it probably over a week before ordering. If you take your time, it can be routed, but I saw all the tie straps and figured strap it to everything they say to avoid instead. Lol I didn't have to drill a single hole with my 2012 Escape. The weather stripping is so thick. No exposure to weather for the 4 pin. Made more sense than not putting it in the side holder when not in use. The power pack sticks behind a trim panel too.



by:
Ford

Works great. One fitment note for ford Vans with rear A/C. the A/C panel does not come off. Its Hot riveted in place. So you have two options. Pull seats and trim all the way out. Or break the panel off. I broke mine. the rivets broke easy and after install clear silicon re-attached the panel. I routed the 4 prong down the tire anti-theft plate. Making the install clean.



by:

Installed and working great!



by:
2008 Ford Escape

Easy install. Wire harness is completely inside vehicle and stored in the jack compartment easy access.



by:

Trailer harness is working great after 1 year. Installation instructions and video were easy to follow. Very pleased!



by:
2011 Ford Escape

I ordered a # 118551 harness for my 2011 Ford Escape and It was easy to install with the instructions and the video links that were available. 5 stars



by:
2008 Ford Escape

I was a bit hesitant when it came to ordering the special harness for the Escape equipped with backup sensors (3x the price of the basic one & 3x the work to install), but it was pretty much confirmed: the non-towing equipped harness isn't designed to handle the extra load of trailer lights - so this kit gets it power from a beefy lead connected directly to the battery.
I have to say that crawling under the car, running this power lead from the d/s taillight to the battery was the biggest pain of the whole job - including installing the receiver, but I didn't have a choice.
etrailer's how-to video proved to be invaluable and a time-saver. Seeing the actual installation on my specific vehicle was huge. I used the video as the manual and read the manufacturers directions as backup.
Kudos to etrailer for putting together these videos and learning about the products that they sell.
Kind of like the Crutchfield of trailers, only better.
On another note, I inquired about shipping time and received a prompt email reply with a note about etrailer making sure that my receiver and harness would be shipped a.s.a.p. - which it was.

Jptl

2/4/2015

I really cant provide a one year later review - not because I sold the vehicle, but because it is now my daughters car and she never uses the vehicle to tow. She only uses the receiver for a Yakima bike rack. I believe that the finish on the receiver has held up well as the car has endured harsh elements here in the DC area they like their salt - especially this winter. Id be happy to take a look at the finish of the hitch in the Spring if you remind me to do so.



by:
2012 Ford Escape

A true "Plug-and-Play" harness that was easy to order, came to my door quickly and best of all was easy to install on my 2012 Ford escape. I'm not an electrical person at all and considered taking my car to the dealer, when I saw the price they wanted, more than $500, it was a no brainer. I was initially worried about installing it myself, but looking it over and looking at the simple instructions that included photos, I did it in about 3 hours, again, I took my time, took a lot of breaks, and did a lot of extras like my own larger zip ties, dielectric grease, hiding all the wires, mounting the 4 pin to 7 blade converter female end electric connection to the hitch, etc... It all worked perfectly! My only complaint, if you really want to call it that, is that the tiny zip ties provided are nowhere near what is needed to do the job right, get a pack of larger zip ties, ones that are about 10 inches long, before installing this harness, it will make it SO much easier and look SO much better.

Dave

6/22/2017

After a year its all good! It all works perfectly and still looks great. Im not worried at all when we plug in the trailer and do a light check. If I can do it, anybody can do it, its that easy.



by:
2009 Ford Edge

Nothing but props for the folks at etrailer. My hitch receiver for our 2009 Ford Edge arrived a day earlier than I had expected. First time installing one of these and it wasn't too bad but would have been way better with a second set of hands. Got it all in and lined up only to discover one of the rectangular washers was missing from the hardware kit. Fearing the worst, I sent them an email and to my surprise I got an answer within 30 minutes on a Saturday no less. No hoops to jump through or long drawn out procedures. They got my part ordered to ship out and it was here by midweek. Great customer service is what it's all about. Problems arise but the true colors come out by how a company chooses to respond to even a little thing like a missing washer. Thank you etrailer! You have my business again when it's needed and I'll be recommending you when friends ask where to go.

David P.

12/31/2021

Not Surprisingly the hitch and wiring have worked flawlessly. Very pleased with this product!



by:
2010 Ford Escape

I have installed this Harness in place of a harness that I purchased that I purchased from eTrailer two years ago. As I have just installed this all I can say is that so far it works as it is supposed to. My hope is that it lasts longer than just two years. My tow vehical is a 2010, the first harness was dealer installed and it lasted about sixteen months, with both failures, I checked the trailer wiring and found no problems and in each case the harness failed without the trailer being connected. So I do hope that you have corrected what ever the problem was as I am getting tired of paying out $70.00 every two years for something that should last much longer.

Jeff C.

12/18/2015

I had exactly the same experience. It all worked fine after I installed it and then some months later when I bought a trailer and hooked it up, it was dead. Never did get to use it. Now I have to take everything apart and remove the harness. I dont plan to put in another one.



by:

If you have the option to use one of these custom fit kits for your trailer or tow vehicle wiring or both, don't hesitate to purchase. These kits make wiring a snap and both can be used in series if necessary without cutting or splicing any factory wire. I used this in comping with a Hopkins kit for my towed vehicle with no issues.

Great P.

9/20/2020

Great



by:
2013 Ford Van

Like the harness but confusion on the colors from the video to the instructions. After install, I had to switch the wiring left to right. But otherwise great.



by:

I am still happy with the purchase of the vehicle wiring harness. It is performing very well and the wiring is holding up to the elements such as road salt, moisture, and grime.



by:
2009 Mercury Mariner

Very easy to install on my 2009 Mercury Mariner. Everything required was included. The only "difficult" part was running the wire from the rear of the car to the positive terminal of the battery. The wire was plenty long enough and more than enough wire ties were included for the job. I took the rear bumper off which made running the wires between the rear lights and the module much easier.

John K.

8/20/2019

It was working fine. We have since sold the car. Now, since I had such great results, I have to buy a hitch and adapter for my new car.


25
580
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Brake Controller Install Parts Needed for 2014 Ford Van without Trailer Wiring
    To install the Curt brake controller part # C84VV in your 2014 Ford E-350 you will need to install a 4-way with part # 118551 and then use the part # ETBC7 to convert it to a 7-way and install the controller. You are going to have to test all of the wires that lead to the brake pedal switch till you find one that only sees voltage when the brakes are applied.
    view full answer...
  • Comparing CURT Class III Trailer Hitches for a 2008 Ford Escape
    The CURT Trailer Hitch # 13650 and # C13651 are very similar. The 13650 has some additional hardware and updated instructions that make it compatible with the 2012 Ford Escape. The 13651 hitch only includes up to 2011 on the Ford Escape. The other difference is that the C13651 will fit if the vehicle has a factory 1-1/4 hitch already installed. I have incldued a link to the installation details for the 13650 as well as a video showing a typical installation. If you plan on doing some towing...
    view full answer...
  • Parts Needed to Add 7-Way Trailer Wiring Harness to 2011 Ford Escape
    To install a 7-way on your 2011 Ford Escape will first require you to install the 4-way kit part # 118551 which is easiest install and most reliable. Then to convert it to a 7-way you'd need the # 37185 for if the trailer does not have brakes or part # ETBC7 for if the trailer does. You'd also need a brake controller at that point with the Draw Tite Brake EVN # TK63VR.
    view full answer...
  • Does Tekonsha Trailer Wiring Harness from 2005 Ford Escape fit 2010 Escape
    The Tekonsha wiring harness part # 118426 only fits up to the 2007 Ford Escape so it would not work on your 2010 model. For the newer Escape you'd need the part # 118551.
    view full answer...
  • What Tow Wiring do I Need for Towing a U-Haul Trailer on My 2009 Ford Escape?
    We definitely have what you are looking for! Based on the vehicle you inputted in our fit guide and the Draw-Tite Hitch # 75751, you are asking for a 2009 Ford Escape. If you just need tail light, running lights, and brake light functions, you need either the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118551 (if you do not have a factory tow package) or the # 118251 (if your vehicle has a factory tow package). As with all towing applications, I recommend consulting...
    view full answer...
  • 4-Way Flat Wiring Recommendation for a 2010 Ford Edge
    In addition to the Draw-Tite Trailer Hitch # 75992 for your 2010 Ford Edge, I recommend the following wiring and mounting brackets: - T-One Vehicle Wiring Harness # 118551 - Brophy Mounting Bracket # BK4F - Curt No-Drill Bracket # C57202 This gives you the best 4-Way wiring kit on the market as well as what you need to hold the 4-Way near the hitch receiver for easy access when needed. attached are some videos for you to check out!
    view full answer...
  • Adding a 4-Way or 7-Way Trailer Wiring Harness to a 2012 Ford Explorer with No Tow Package
    You are correct, harness # 118251 is designed for those vehicles that came with a factory tow package. For a 2012 Ford Escape without a Tow Package, you will need to use Tow Ready Wiring Harness, # 118551. This converter plugs in line with the tail light wiring and requires a direct connection to the vehicle battery via the fuse and fuse holder included with the kit. I have included a link to the installation details for you. If you wanted to add a 7-Way trailer connector to the vehicle,...
    view full answer...
  • Installing a Trailer Brake Controller on a 2011 Ford Escape with Factory Tow Package
    I spoke with my contact at Tekonsha about a brake controller wiring adapter for a 2011 Ford Escape with the Trailer Tow Package. He did not have specific information regarding the 2011 models, but historically the Ford Escape has been a hardwire only model. This means that you would first need a 4-Way wiring harness. With the factory tow package, you would use the Draw-Tite Custom Fit Vehicle Wiring, # 118251. Without a tow package, you would use the Tow Ready Custom Fit Vehicle Wiring,...
    view full answer...
  • Recommended Towing Hitch for 2010 Ford Edge SEL 2WD
    For your 2010 Ford Edge SEL 2WD I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75992 because of its hidden design. This particular Class III hitch, which is confirmed to fit your Edge SEL, features a drop-down 2" receiver that allows the crosstube to be completely hidden behind the bumper. This means only the receiver itself will be visible, which not only creates a sleek factory-like appearance but also helps provide better ground clearance for your ball mount and...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Wiring Recommendation for 2010 Mazda Tribute without Backup Sensor
    Yes, if you plan on towing a trailer and not just use it for non-trailer loads like a bike rack or a cargo carrier, you need a wiring harness to power up the trailer lights. If your 2010 Mazda Tribute is equipped with a factory tow package you need item # 118251. If your vehicle does not have a factory tow package, then you need item # 118551. The T-One Vehicle Wiring Harness # 118551 will work either with or without backup sensors. I recommend the 4-Flat Mounting Bracket # 18144 for a...
    view full answer...
  • Troubleshooting Driver Side Turn Signal Not Working on 4-Way for 2009 Mazda Tribute
    Since only one function is not working it doesn't sound like it is the converter box. Although there could be a problem with the connectors, there should be no real loss of conductivity over time. It is possible that the # C56329 needs to be replaced, but there are a few things you can check first before going that route. The first thing I would do is double check the connectors. If the connector is not fully seated and came apart over time it could explain why it went out intermittently...
    view full answer...
  • Trailer Wiring Recommendation for 2009 Ford Escape
    Since your 2009 Ford Escape does not have the towing package what you'll want for trailer wiring is the part # 118551 which is a confirmed fit. The kit you mentioned is for older Escape models and would not work for you.
    view full answer...
  • Will LED Brake and Tail Light Hitch Cover FHG72VR Fit a 2010 Lincoln MKX Trailer Hitch
    TheFlint Hill Goods Square LED Brake Light Hitch Cover for 2" Hitches # FHG72VR is made to bit a 2" shank. If you want to use it in the 1-1/4 inch hitch on your 2010 Lincoln MKX, you could use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02. Your vehicle will need to be equipped with a 4-Way plug in order for the lights on the hitch cover to function. We offer a custom-fit wiring harness, part # 118551, for your vehicle if needed.
    view full answer...
  • Will CURT Trailer Hitch Part 13650 Fit 2011 Ford Escape V6 4x4 and Is Drilling Required To Install
    Yes, the CURT Trailer Hitch Receiver - Custom Fit - Class III, part # 13650, will fit your 2011 Ford Escape V6 4x4. The only drilling would be to enlarge an access hole to fit the mounting hardware through. I read the instructions for part # 13650 and it states that if there is access at the end of the frame rail then there will be no need to drill out the existing hole. If you plan to use your hitch for towing you may also need a ball mount, hitch ball, pin and clip. For this I would...
    view full answer...
  • Will The Draw-Tite Trailer Hitch # 75751 Fit 2012 Ford Escape XLT w/ Factory 1-1/4 Hitch
    The item you referenced, Draw-Tite Trailer Hitch, part # 75751, will fit the 2012 Ford Escape models with factory 1-1/4 inch hitch. You will not need to remove the factory hitch to install the # 75751 hitch. To complete your towing setup, you may need the following: Ball Mount, part # D-4 2 Inch Hitch Ball, part # 19258 Pin and Clip, part # PC3 For wiring, if your Escape has backup sensors you will need to use T-One Vehicle Wiring Harness, part # 118551. If your Escape is equipped with...
    view full answer...
  • Trailer Wiring Harness Recommendations for a 2008 Ford Escape
    Since you have the plug you most likely have the tow package and the correct wiring harness to use would be the # 118251 that you referenced. You can test this by using a circuit tester like part # PTW2993 to test the pins of the connector for voltage when the taillight circuits of your vehicle are applied. If there is voltage there then the # 118251 would work well for you, otherwise you would want the # 118551. To activate that harness you would have to contact a Ford dealership to see...
    view full answer...
  • Recommended Brake Controller And Wiring For 2012 Ford E-350 Van
    If you have a factory 4-way trailer connector at the rear of your E-350 Van you can use the Prodigy P2 brake controller and plug-in adapter, # 90885 and # 3034-P. I have attached a photo that shows where you can plug the adapter into behind the dash. You will then need part # 37185 to give you a working 7-way. You will need to run the brake wire from the brake controller to the plug using part # 10-1-1. If you do not have a trailer connector on your van you will first need a 4-way trailer...
    view full answer...
    Image 1 for
  • Availability of a 4-Pole Trailer Wiring Harness for 2011 Ford Edge SEL AWD
    For your 2011 Edge, I'd recommend the Tow Ready vehicle wiring harness, part # 118515. The wiring harness plugs inline with the connection between the factory wiring harness and the vehicle taillight assemblies. You'll need to run one wire under the vehicle up to the positive battery terminal. I'll link you an FAQ article and an install video that you might find helpful.
    view full answer...
  • Trailer Wiring Harness Troubleshooting for a 2009 Ford Escape
    Usually in situations where the wiring harness/converter has gone bad it is just due to a short from the trailer or a bad converter. But when it happens this often and with more than one brand, something else is going on. First, we need to make sure you are getting the correct harnesses. Both the CURT harness, # C56329, and the Tow Ready, # 118430, are designed for the 2009 Ford Escape WITHOUT tow package. If your Escape has a tow package, you would need # 118251. If you have a tow package...
    view full answer...
  • Can a Trailer Hitch Be Detected by the Back Up Sensors on a 2009 Ford Escape Hybrid
    The available hitches for your 2009 Ford Escape will all extend a little beyond the bumper, but not by much; only about 1 inch. What you can do to test the sensors ahead of time is to place something that extends about 1 inch from the bumper where the hitch would be. If the sensors pick it up, then there is a possibility they will sense the hitch. I would think it is unlikely since the distance is only 1 inch and a steep angle up to the sensors. Even if the hitch did trip the sensors...
    view full answer...
  • Brake Controller For 2009 Ford E350 Van
    You said your Ford E350 does not have a towing package. From your question it sounds like you are looking at brake controllers and the wiring needed to install it. Brake controllers were an available option for 2009 Ford E350. Because the OEM Brake controller was an option on that vehicle, it would most likely be possible to install one at a later time. The controller and related equipment such as the wiring harness and trailer connector could be found online, but an aftermarket controller...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2006 Mercury Mariner
    I have a solution for you, but the Valley Wiring harness part 30130 has been discontinued. For a very similar wiring harness confirmed to fit your 2006 Mercury Mariner I would recommend the Tow Ready Harness part # 118551. This harness is available and would work well. I attached an install video for you to check out as well.
    view full answer...
  • Hitch Recommendation for a 2007 Ford Edge
    Yes, the Draw-Tite Hitch part # 75992 that you referenced has been confirmed to fit your 2007 Ford Edge so I would recommend it for you. I attached an install video that shows this hitch being installed on a 2008 Ford Edge for you to check out. For trailer wiring you would want the part # 118551. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
    view full answer...
  • Why the Power Wire for a T-One Vehicle Wiring Harness Needs a Direct Connection to the Battery
    T-One Vehicle Wiring Harness, # 118551, requires a direct connection to the battery. This is because if it is tapped into another power source whatever else is using that power source could cause it to overload, damaging the sensitive wiring, taillights, and any number of other electrical components in the vehicle. The protection that the modulite supplies is dependent on the battery connection. This is so that the vehicles sensitive wiring is not used to provide power to the trailer....
    view full answer...


< Previous
123. . .12



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Patrick B
Test Fit:
Patrick B
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.