Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector
Item # 20135
Retail:$65.74
Our Price: $48.98
You Save: 25%
Confirmed to Fit
2006 Jeep Grand Cherokee
with factory Tow Package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (65)
- Q & A (0)
- Videos (1)
- Photos
2006 Jeep Grand Cherokee - Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector
- 4 Flat
- 7 Round - Blade
- Trailer Hitch Wiring
- Tekonsha
- No Converter
Tow Ready Replacement 7-Way Flat Pin and 4-flat Combo Adapter Harness for Vehicles with a Factory Socket
- Ability to tow trailers with different style trailer connectors
- Durable plastic shell
- Provides both a 7-Way and a 4-Way covered trailer connector
- Mounting bracket included
- Replacement socket for vehicles with a factory 7-way
- 1-Year limited warranty
20135 Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector
Installation Details
California residents: click here
Video of Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 20135 Review
Today, we're going to review part number 20135. This is the Tow Ready multi-plug OEM replacement harness. This kit will let you add a 7 way RV style trailer connector and a 4 way connector to your vehicle. It has the factory tow package. This is a custom fit part number. It is designed to plug into a Dodge, Chrysler, Jeep, and Mitsubishi vehicles, starting in the year 2000, that have the factory 7 way connector.
I would recommend this to go to our fit guide on our website, and you can put in your year and model of those vehicles, and it would tell you if this would be the correct part number for your application. This is a plug in, simple installation. There's no cutting or splicing required. This wiring harness, basically, will plug into your factor wiring at the back of the vehicle. The plug right here is extremely durable ABS plastic construction. It has a nice, oversized lid hinge right up here.
It helps keep out any dirt and moisture from getting to the terminals. It also has nice, enhanced weatherproofing. They do use seals on the cap itself, and the terminals are corrosion resistant. It does include the mounting bracket and the screws. They're all included. Basically, what you would do is, before you go and plug this in to the back of your vehicle, I would take your mounting bracket, slide it on.
Slide the four way also through there. Bring it all the way up, and you can see that it will line up. The holes on the mounting bracket will line up with the holes right there. At the very top, you'll see the holes for mounting it to the vehicle. Then, what's nice is, you'll see this little cutout on the side.
Basically, that's where you can just slide in your 4 way just like that. Then, plug this in and with this plugged in, this would be at the back of your vehicle. You have access to the 7 way, and then the 4 way, just like that. That should do it for the review on part number 20135, the Tow Ready multi-plug OEM replacement harness. .
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector - 20135
Average Customer Rating: 4.8 out of 5 stars (65 Customer Reviews)
by: Steven C.09/25/2015
1998 Dodge Ram Pickup
Exact same product that was in the picture arrived at my door, so the item was exactly as described. It plugged directly into my factory wiring harness on my 1998.5 Dodge Ram 2500 with a 24v Cummins. It did not fit on the factory mounting position, but mine was very bent anyway. So I cut it off and used the included mount. The self tapping screws that were supplied were not very strong, so I had to use rivets to secure the mount. But I was mounting it on the hitch receiver which is very thick steel, so it was expected. Overall, great product and works as it should.
by: Jim09/03/2018
2006 Dodge Ram Pickup
Yes, this product works great. It plugged into the factory harness. I would recommend this product
by: Ross s08/03/2012
little problem hooking up to trucks wiring harness due to plastic square
connector being bent out of shape on bottom a little able to reshape and hookup,connector is a lot better quality than original one that was on truck and has 7-way & 4 pole connections makes towing different trailers easier awesome! fast shipping great price! helped me avoid dealing with dealerships high prices and delays on shipping and getting wrong product, website was easy to order from and great description of connector with good quality photos will save on my favorites and pass on to friends thank you Ross
by: Rex G06/09/2015
2008 Jeep Liberty
This is a nice quality part I'm using to replace the OEM connector on a 2008 Jeep Liberty. I really like the way it has a four pole connector in addition to the 7 way connector which saves time and the hassle of finding the four pole adapter to plug into the 7 way socket. The OEM part that came with the Jeep was 7 way only. This is a great improvement. Fast shipping and super communication. Thanks!
Rex G.
6/8/2016
nicely thanks
by: Dan G.10/11/2014
These people understand customer service. I volunteer with SCORE as a small business counselor / mentor and the people at eTrailer epitomize how customer services should be handled. I requested confirmation that the part would work for my truck even though it listed several years beginning with the year after mine. They researched and determined that only the bracket would not be the same which was not a problem for me. Excellent product. Excellent service. Excellent company.
by: Glenn11/13/2014
2000 Dodge Ram Pickup
Wonderful product. All I had to do was pop out the old wiring harness and plug in the new. Easy as that. Bought a travel trailer so need the 7 way, but have a boat which uses the 4 flat wire so problem solved. Happy camper and boater. Great price as well. As a ebay person I couldn't find a better deal. Now etrailer is bookmarked on my PC..
by: Benjamin01/21/2022
Has held up really well. My vehicle had an aftermarket harness already installed, but the video on the etrailer site made fitting the new one in much easier. The instructional videos on this site are really fantastic.
by: Ken S.03/08/2017
2005 Jeep Grand Cherokee
Great customer service experience! The notification and follow-up was excellent regarding receiving my order, shipping my order and delivery of my order. This particular connector was exactly as advertised and plugged directly into my 2005 Jeep Grand Cherokee Laredo's factory wiring harness. I had to make a few minor modifications installing the bracket but it worked out just fine.
by: John06/22/2019
The trailer adapter that I received is the EXACT Factory replacement item at a very reasonable price. Much less than the dealer was charging for the exact same item. Thank You!
by: Dino03/15/2017
Had a small trailer I would always pull my dirt bikes never had trailer lights hooked up, which is illegal, I saw a product at etrailer for Only $29 bucks ,one two three clicks ,works imperfect. Avoid getting a ticket and for safety literally takes 5 minutes I would recommend hooking up your trailer lights
by: Tom M.11/04/2016
2006 Chevrolet Silverado 2500
This was another great part from etrailer I installed it in just a few minutes on a 2006 dodge 2500 4x4
by: Jon L.06/05/2015
2001 Dodge Ram Pickup
This product is genius! I no longer have to carry around an adapter for my utility trailer. It perfectly connected to my 2001 Dodge Ram and installed in less than 5 minutes. I have made several purchases from etrailer.com and I am more than satisfied.
by: John06/22/2019
2004 Dodge Durango
Exact Dealer Replacement Item. 2004 Dodge Durango Trailer electrical connector.
by: Dennis 10/10/2019
Easy install in my OEM footprint. Makes it easy to use either kind of trailer connector. Can't lose an adapter you do not need to use!
by: Art R.04/29/2017
1999 Dodge Ram Pickup
Bought this for my 1999 Dodge Ram 2500 and it was a perfect fit. The website made it easy to find the right part for my vehicle and the delivery was quick and without delay. I would purchase again from etrailer.com.
by: Albert05/23/2014
2003 Jeep Grand Cherokee
Good. Wasn't an exact fit on my jeep. I already had a bracket for the part on my car. Had to modify this piece to make it fit on the bracket already on my jeep. The plug was a good fit though
by: Mike c09/23/2013
2003 Dodge Ram Pickup
Shipping was fast. Got the product in good condition. Plugged right in to the factory plug like it was supposed to. Should send some dielectric grease with it but overall very pleased.
by: Art S03/07/2016
2003 Dodge Ram Pickup
Product was easy to install and a valuable addition to my truck. A well deserved upgrade to my trailer towing ability.
by: Michael L.10/27/2011
Product is superior, the best 7 way that can be found it hooks right up to the wire harness easy as that hardware included is great.
Works exceptionally great. Great people at etrailer, shipping was fast.
by: William06/29/2018
Jeep
I don't know how to post a picture, but trust me, this thing fit my jeep perfect. it was easy to install, no hassles at all. the young lady on the phone was very helpful and was very familiar with the product. it was delivered in a couple days, and was half the price the jeep dealer quoted. this was my third order. I'm very happy with price, service, products. I give them my highest recommendation.
by: Mark 06/27/2016
2008 Dodge Sprinter
The best " plug n play " set up. The duo set up has made it easy to tow various types of trailers
by: Daniel N.07/10/2016
1999 Dodge Ram Pickup
Hooked up in seconds and works great. I have the plug temporarily attached with zip ties until I decide on a permanent mount.
by: Gary Ashby05/19/2017
2000 Chevrolet Silverado 3500
Shipping was extremely fast. Fit perfectly. Plug matched my 2000 Dodge 3500. I didn't want to strip and clamp wires and with this factory fit I didn't have to. ( and a flat 4way to boot. )
by: Kordell07/05/2021
2003 Dodge Ram Pickup
I have not installed the product yet but I am hoping that the installation is simple
by: Bill 09/26/2019
Quick delivery received it in 2 days packaged great product seems to be good as i haven't installed it yet but extremely satisfied with customer service. Would recommend etrailer to anyone
25
65
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Replacement 7-Way Trailer Connector for a 2010 Toyota TacomaIf you remove the factory 7-Way (if you haven't already) does the wiring harness that plugs into the back of it have a round connector or square? If it is round, you could use # PK11893. If it is a square connector though you would need to hardwire in a trailer connector such as # HM40975-11998. To do this you would have to cut the square connector off and use a circuit tester such as # PTW2993 or a meter if you have one to test the wires on the vehicle side to determine their functions....
view full answer... - How To Determine if a 2006 Jeep Grand Cherokee has a 7-WayIf you look at the back of your 2006 Jeep Grand Cherokee and see a wiring connector that looks like the Tow Ready Wiring harness part # 20135 then you have a 7-way. Another option you could have is a 4-way which would look like part # 18172, or you might not have any connector at all. To add a 4-way you would first want the Tow Ready Wiring harness part # 118394. If you needed to upgrade to a 7-way you would need the 4-Way to 7-Way adapter part # 37185 after installing the #118394. For...
view full answer... - Adding a 4- and 7-Way Trailer Connector to a 2000 Dodge Ram with Factory Wiring HarnessWe have 4-Ways that Tee into that square factory connector, such as # 118381 which also fits some full size vans. We also have a 7-Way # HM42190 but it doesn't have a 4-Way built in. But we also have # 20135 which is both a 4- and 7-Way and has that squarish connector. If you are not the original owner of the truck then it is possible that it came with a 4-Way flat (or someone added one) and then used a 4- to 7-Way adapter such as # 37185.
view full answer... - Trailer Wiring Harness on a 2005 Jeep Liberty with Factory Installed Trailer Hitch ReceiverIf your 2005 Jeep Liberty has the factory tow package there will be a rectangular shaped connector under the rear bumper. I've attached a picture to show you what the connector looks like. If you find it you can install a 4-way and 7-way connector using # 20135. If that connector is not there then you'll need to use a T-One wiring harness like # 118524 which installs behind the tail lights of the Jeep. Then there is a hot lead wire that is run to the battery to power the harness. This...
view full answer...
- Finishing Brake Controller Output Circuit on 2003 Dodge Ram with 4-Pole Trailer ConnectorAs your Ram is not equipped with the 7-way connector, the brake output and 12-volt accessory circuits are not ran to the rear of the truck. You will first need a 4-pole to 7-way adapter like part # 37185 that will plug into your existing 4-pole. You will need to run a length of 10 gauge wire from the blue lead of the adapter under the vehicle to the engine compartment. Make sure to avoid any moving parts like the suspension and steering components and anything hot like the exhaust. In...
view full answer... - Replacement 4 and 7-Way Trailer Connectors for a 2010 Ford F-250There isnt a connector that fits in exactly the same place as the factory 4 and 7-Way on your 2010 Ford F-250, and the individual parts are not available either. But we do have some replacement 4 and 7-Ways that you can use. For the connectors and a mounting bracket but no additional wiring harness use # HM40975. Or for a slightly different design with a wiring lead use # C55774.
view full answer... - Trailer Tail Light Signal Not Working on 7-Way Connector on a 2002 Dodge Ram 2500If you have isolated the problem to the 7-Way connector on your 2002 Dodge Ram 2500 then you will want to start off by looking at the connector itself. Check to make sure that there is no corrosion built-up inside; if you find any (looks green or white) then you will want to go ahead and clean it out. If your Ram has the OEM tow package then you might need to replace your connector if you clean it out but the wiring still isn't working. Tekonsha has their Multi-Plug T-One Connector Assembly...
view full answer... - Wiring Harness Recommendation For 2006 Jeep Liberty Without Factory Tow HarnessThe Hopkins Plug in Adapter, part # 42475, is not designed to work with your 2006 Jeep Liberty, but we do have a solution that will work for you. For your Liberty, you will need to check to see if your vehicle has the necessary connector and if it is active. You would need to locate the connector at the rear of the vehicle that should be near the drivers side frame rail by the spare tire. You can use a circuit tester like part # 3808 to test the pins of the connector for the various taillight...
view full answer... - Trailer Connector On 2009 Dodge Ram 2500 Is Not Working When Connecting Gooseneck Travalong TrailerIt sounds like the vehicle end connector in the bed of your truck is damaged or the wiring in the trailer connector may be damaged. Using a circuit tester like part # PTW2993, you will want to test the wires going into the 7-way on your 2009 Dodge Ram 2500 to see if the connector is damaged. If the wires show current to the connector but the connector is not working, you need to replace the vehicle connector. If they do not show current the problem will be further up the wiring harness...
view full answer... - Replacement Trailer Wiring Connector for 2007 Ram with Factory Tow PackageTo replace the factory plug on a 2007 Ram with the factory tow package you can use the Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector # 20135. This is an easy to install plug and play connector and it comes with both a 4 way and 7 way to allow you to tow trailers with different connectors.
view full answer... - Troubleshooting Several Trailer Wiring Issues with Very Corroded 7-WayThe picture of your 7-way is the biggest clue to the root of your problems. You have a ton of corrosion in there which can cause all sorts of problems from shorting circuits out like you mentioned (the smoking circuits) as well as causing intermittent connections like what your wife noticed when following you. You need to thoroughly clean the connector to rid it of all of the corrosion that you have or replace the connector with a new 7-way like # HM48480 which will give you the easiest...
view full answer...
- How to Add a 7 Way Wiring Harness to a 2005 Jeep LibertyThe Tekonsha # 20135 is specifically designed to be used on a 2005 Jeep Liberty with the factory towing package. If you are unable to find the port for this to connect to, you may not have the factory towing package. The only real way to confirm if you do have this package is to contact a Jeep dealer and have them run your VIN. They should be able to tell you right away if you do or do not. If you do not end up having the towing package, you will need to start with a 4 flat, like the Tekonsha...
view full answer... - Replacement Trailer Connector for 2007 Ford F-150The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End, part # PK11893, is an exact OE replacement for your vehicle-end trailer connector. I have included a link to the part below.
view full answer... - Parts Needed to Install a 7-Way and Brake Controller on a 2006 Jeep LibertyIt's possible you would be able to install the part # 20135 on your 2006 Jeep Liberty, you will need to check to see if your vehicle has the necessary connector and if it is active first. You would find the connector at the rear of the vehicle near the drivers side frame rail above the spare tire. Using a circuit tester like part # PTW2993 test the pins of the connector while applying the different taillight functions. If that all checks out the # 20135 would work for you. If not you...
view full answer... - Trailer Lighting Troubleshooting On 2002 Dodge Ram 2500 DieselOn your 2002 Dodge Ram 2500 Diesel, I recommend using your incandescent test light like # PTW2993 to check for functions at the factory connection that goes into your Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector # 20135. If you have functions at that plug, then replace the # 20135. If you don't have functions at the vehicle plug, and the fuses all check out according to your owners manual, then there is a problem with the factory harness. You would need a...
view full answer... - Recommended Hitch For A 2001 Dodge Dakota Quad Cab We have several hitch receivers available for your 2001 Dodge Dakota. All of which are compatible with regular, club, and quad cab models. I recommend using the Curt Trailer Hitch Receiver part # C13280 as this is a custom fit hitch specifically designed for your truck. It is a CLASS III hitch capable of towing a trailer up to 5,000 lbs. You will also need a wiring harness in order to activate your trailer's light circuit such as the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer...
view full answer... - 7-Way and 4-Way Trailer Wiring Harness Recommendation for a 1999 Dodge RamYes, the Multi-Plug T-One Connector Assembly # 20135 will work to replace the 7-way on your 1999 Dodge Ram to provide you with both a 7-way and a 4-way.
view full answer... - 7-Way Trailer Connector for 2008 Jeep Grand Cherokee with Factory Tow PackageI have a solution for you, but the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket # PK11893-11933 is not confirmed as a fit for your 2008 Jeep Grand Cherokee. For a similar 7-way connector that is confirmed to fit the 2008 Grand Cherokee with the factory tow package you can use the Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM42190. For a 7-Way and 4-Pole connector that will fit the 2008 Grand Cherokee with factory tow package, the Tow Ready Multi-Plug T-One...
view full answer... - Wiring Harness and Brake Controller Fit for 2006 Dodge Ram Pickup.The Vehicle Wiring Harness Kit # C59496 will provide you with a 4-way trailer connector. This connector will be hardwired into your vehicle and provide tail lights, brake lights, and turn signals for the lights on your trailer. This connector will not provide operating power to the trailer's electric brakes. If your Ram Pickup does not have a factory socket at the rear of the vehicle for a trailer connector, you will want to use a hardwire kit, such as # C59496. To provide the 7-way connector...
view full answer... - Factory Connection Points to Add Trailer Wiring and a Brake Controller on a 2005 Dodge DurangoIf you are talking about the connection point for a brake controller then you can find the factory connection underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. If you are talking about adding a 7-Way, the factory connection point for a 7-Way trailer connector on a 2005 Dodge Durango is located behind the rear bumper or along the driver side frame rail on the drivers side of the vehicle. There will be a rectangular plug. You...
view full answer... - Recommended Trailer Wiring For 2008 Dodge Ram 2500 4x4 With OEM Towing PackageIf the vehicle side trailer plug is the issue, you can use the Tekonsha Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector # 20135 as a replacement. If the trailer side is the issue, you can use the 7-Way Molded Trailer Plug with Junction Box # HS381-9000. To determine which side is needing to be replaced, you can use the circuit tester # PTW2993 to test the pins for proper function. You can also clean the connections on either side and use some dielectric grease...
view full answer... - Availability of an OEM Replacement 7-Way Trailer Connector and Wiring Harness for a 2003 Ford F-250While there is not a specific harness for the 2003 Ford F-250 that is an OEM replacement, I do have a solution for you. Since your truck came with a factory installed 7-Way trailer connector, you can use the Curt 5th Wheel and Gooseneck Wiring Harness, # C56000. Instead of installing it in the bed of the truck, you would just route it to the back. I have included a video link that might help with installation.
view full answer... - Adding 7-Way/4-Pole Vehicle Socket to 2005 Dodge Ram 3500 Pickup with 4-Pole ConnectorIf your 2005 Dodge Ram 3500's existing 4-pole trailer connector works and you want to convert that to a combination 7-Way/4-pole format you can plug in part # 37185 from Hopkins. This item has both connector formats (7-way RV style and 4-pole flat) and simply plugs in to your existing 4-pole wiring. The lighting signals will then appear on both the 4-pole and 7-way contacts. The Hopkins part also includes pigtail leads to make the additional circuit connections for trailer brakes, 12V...
view full answer...
- Recommended Trailer Wiring for 2007 Jeep LibertyFor your 2007 Jeep Liberty, many people have a receiver for a bike rack or cargo carrier and have not added the trailer wiring which sounds like what you are finding. If your vehicle has the factory tow package, the harness you will need to connect to is found under the vehicle in the center behind your hitch receiver. If you have that tow package then you can simply use the Tekonsha # 118381 for a 4-Way or # 20135 for a 7-way. You may still need to add # 5506 on some models for 12v...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
DeAnne T
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jim D.
7/21/2013
Does this assemble connect to the wiring behind the left light assemble on the durango? want to make sure Im looking at the right thing. I need the entire assemble.