bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Dodge
  3. Ram Pickup
  4. 2014
  5. Tekonsha
FITS 2014 Dodge Ram Pickup
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118384
Our Price: $41.94
Custom Fit Vehicle Wiring
Confirmed to Fit
2014 Dodge Ram Pickup

1500 with factory 7-Way

2500 and 3500 Pickup with factory 7-Way

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 0.73 lbs
Add to cart
In Stock
Tekonsha Custom Fit Vehicle Wiring - 118384
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Dodge custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of Tekonsha products for your Dodge Ram Pickup 2014. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118384 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (445)
  • Q & A (0)
  • Photos

2014 Dodge Ram Pickup - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • No Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your Dodge Ram Pickup. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Retains functionality of factory-installed 7-way, RV-style connector (if present)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind rear bumper
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the rear bumper. If you have a factory-installed 7-way, blade-style connector, the T-One will plug in between the 7-way and the OEM socket.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118384 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118384 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118384

Average Customer Rating:  4.8 out of 5 stars   (445 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.

by:
2011 Chevrolet Silverado

I used this harness to add a tailgate strip light to my 3011 Silverado. The whole process including installing the light strip took 45 minutes. The harness plugged in in minutes and works beautifully.



by:
2013 GMC Sierra

Have been looking for a T-connector for my trailer lights for two years. Truck has a seven pin connector built-in. Wanted my GMC emblem to light up when the breaks are applied. Was getting ready to cut and splice wires when I looked on the internet and learned about etrailer.com. Found the T-connector I needed. Took 5 days to arrive after ordering, and 5 minutes to install. Works great !



by:
2012 Toyota Tundra

I have a 2012 Toyota Tundra and I recently bought a pre-owned Leer camper shell. I used this harness to wire up the third brake light. I also used the brake light module. This setup worked perfectly and resulted in a neat and clean professional installation. Thanks etrailer, you had everything I needed for a successful prefect installation.

Ron G.

7/13/2023

I installed this unit on my truck one year ago. It was perfect then and it is still working perfectly without issue.



by:

Slow start to a good impression but everything worked out.
1. It started with a delivery delay; I live two hours from the manufacturer but it took 3 weeks to get me my harness. When the error was found they over-nighted the harness to me.
2. The wiring in the harness was loose and would lose connection, disabling the lights. Pushing a connector back in to place, crimping it down and wrapping it in electrical tape solved that issue.
That was a month into owning the harness. It's been a year now and I've had no problems. I'm pleased with the compatibility and ease of which it took to install.

Don M.

5/11/2023

The harness has held up great. Needed no adjustments after original installation.



by:
GMC Sierra

Perfect fit for 2022 Sierra GMC . This leaves your 4 pin vacant to plug in your boat trailer etc



by:

Exactly as described, wires in nicely, has been working flawlessly since the installation!



by:
2016 Jeep Grand Cherokee

Purchased this hitch for my new 2016 Jeep Grand Cherokee Laredo online after being quoted a $700 installation price at my local Chrysler Dealership. After doing some online searching and reading multiple reviews I decided to give these folks a try. My husband and I watched a very detailed video explaining 3 different hitch options for my Jeep and quickly decided for the price it was worth giving it a try. From opening box to install was less than 20 minutes that included connecting trailer light kit that I purchased extra $$.$$. You can barely see it under my JEEP. I'm very pleased and can't hardly wait to use it. Thanks again etrailer.com you helped me prove my to my husband that it would work and saved me $600!



by:

Search hi and low to find what I needed or even for someone who even understood what I needed. I had no luck until I search on etrailer.com. They had exactly what I was looking for. Ordering was simple and delivery was quick. They even check in with me before durning and after shipping. I love this site. I'll definitely shop here first next time.



by:
2016 Jeep Grand Cherokee

I purchased a trailer hitch (C13182) and wiring adaptor (T-One 118384) for my 2016 Grand Cherokee. Received it within a few days and fit was perfect! Only took all of ten minutes to install with the help of my 5 year old. Thank You!



by:
2014 Jeep Grand Cherokee

Bought a trailer hitch, and wiring harness for my 2014 Jeep Grand Cherokee. etrailer was fantastic, right on the money with the videos and it was very helpful in choosing the right hitch. Very easy to install.



by:
2014 Jeep Grand Cherokee

Fit just like it should, engages securely and performs correctly. Nothing else I can ask for



by:

Website very easy to operate and fubd exactly the right part to fit my truck/trailer !!! Videos were very helpful even telling me what sockets and wrenches I needed to complete install by myself and Im a carpenter not really mechanically gifted. Will definitely use etrailer.com again without hesitation!!



by:

TRAILER WIRING HARNESS WENT TOGETHER REAL GOOD. IT ONLY TOOK A VERY LITTLE TIME TO INSTALL. THIS MADE INSTALLING MY LED BRAKE LIGHT KIT VERY EASY.



by:

World class customer service



by:

Always worked for me when purchased in the past so I didn't expect anything less this time.

Reginald W.

8/20/2023

Ive had no problem with this item even thru a harsh winter use. Just make sure you use a little diox grease on the electrical pins so moisture doesnt ruin the contact

Etrailer Expert

Mike L.

9/13/2023

@ReginaldW Good advice, dielectric grease like # 11755 does a great job of keeping moisture out of your electrical connections.


by:

great trailer hitch at fair price.



by:

Fit perfectly, and the [online] video was very helpful



by:

Easy to use web site - got the correct part - I have already ordered more parts - this time for my trailer!!! I will always choose etrailer for my parts

Frank

1/30/2023

It was so easy to install and I have not had any issues with it. Best add on I ever added!!!



by:

Works perfectly



by:
2022 Ram 1500

OEM quality, plugged right in as advertised. My second purchase of a harness of this type from etrailer for a new vehicle, and will do so again.



by:

Installed myself in about 30 minutes. 06 Silverado crew cab. Fit right up to factory fitting that was hidden up on top of the spare tire.



by:

Excellent product and easy to install! Finished up the installation with products 118144 and 118140 for a clean looking install.



by:
2015 Jeep Grand Cherokee

Super easy installation and the addition of the 7 pin means that it is upgradeable. Perfect for me.



by:
2017 Jeep Grand Cherokee

I recently purchased a new 2017 Jeep Grand Cherokee. However, the vehicle was not equipped with with a trailer hitch but came pre-wired for trailering. I asked if the dealership could install a hitch/wiring and was informed that they subcontract the work to a local trailer rental company. I went to the company and was told it would cost approximately $400 and I would have to leave my vehicle with them for four hours, which would have been very inconvenient because I live 50 miles away. As a result, I researched alternatives online to see if I could install the hitch and wiring myself. etrailer.com had the best customer reviews and help videos, so I placed an order for the hitch and wiring harness. My wife and I installed them yesterday, which took about an hour. I saved $270 from what the trailer company was going to charge me. Very happy with the purchase.

Gary G.

4/28/2018

Working fine.



by:
2014 Jeep Grand Cherokee

It is so easy-to-install


25
445
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Reason for Blown 12V Trailer Connector Fuse on 2014 Ram Truck
    Usually a blown fuse is caused by some kind of short from a damaged or exposed piece of wiring. If the 12V fuse on your truck is blown, I recommend tracing the wiring going to the 12V pin on your 7-Way (1 o'clock position) and checking for any exposed areas that might be making contact with bare metal or another wire. Also inspect the 7-Way itself for any debris or corrosion that might be built up behind the pin. I took a look at the online owner's manual for your 2014 Ram and it looks...
    view full answer...
  • Grounding Problem on RV Towed by 2004 GMC Sierra
    The fact that everything pretty much works fine until the headlights are switched on tells the story. What you are experiencing is the classic symptoms of an insufficient ground connection. When the headlights are switched on, the wiring system of the trailer is drawing full amperage, which is when a problem will manifest itself. Make sure that the ground connection on the RV is securely connected to clean metal on the trailer frame. You can find this connection by tracing the white...
    view full answer...
  • Trailer Brake Controller Fuse Location on 2014 Ram 2500
    I took a look at the online version of your 2014 Ram 2500 owner's manual. It looks like there should be a 30 amp pink fuse located in the F11 position inside the power distribution box (under the hood). This particular fuse is for the integrated trailer brake module on the truck. Make sure this fuse is present and in good condition. If the fuse is good or replacing it doesn't resolve the issue, please let me know and we can continue to troubleshoot.
    view full answer...
  • Troubleshooting Trailer Brakes that Don't Work with Only One Vehicle and Trailer
    This is mostly likely a bit of corrosion that is on the pins of the trailer wiring connectors. I would take sandpaper to all of the pins on the problem trailer and truck to see if getting them clean allows the full connection to be made. It also could be a partially bent pin so check for that as well. Other thing to check would be the ground circuits of the trailer wiring. Just go over them and make sure nothing is disconnected or damaged.
    view full answer...
  • Fuse Locations for 7-Way Connector on 2016 Ram 1500 Big Horn
    I took a look at the online version of the owner's manual for your 2016 Ram 1500. There should be a 30 amp pink fuse located in the F30 position inside the power distribution center. This fuse is specifically for the "Trailer Tow Receptacle". Make sure this fuse is present and in good condition. Additional fuse locations related to the 7-Way and trailer towing on your 2016 Ram are as follows: F11 (30 amp pink) - Integrated Trailer Brake Module F28 (20 amp blue) - Trailer Backup Lights F29...
    view full answer...
  • Troubleshooting Running lights on 4-Way Connector Not Working
    I recommend first checking the fuse box in your engine bay and checking your trailer park lamps fuse to ensure it is not blown or missing. If the fuse is there and working correctly I recommend unplugging the wiring harness from the back of your new dual 7-Way and 4-Way connector and verify that none of the contacts inside of the dual connector are damaged causing power to not be transferred through the plug. While there, ensure all wires are tight in the connector and do not have any...
    view full answer...
  • Video For Removing 7-Way Connector of 2011 Toyota Tacoma To Install T-One 4-Way Adapter
    If you fast forward to the 7:33 mark of the attached install video you can see exactly where to squeeze to remove the current 7-way connector to split it and install the T-One 4-way adapter part # 118384.
    view full answer...
  • Where Is the 12 Volt Trailer Connector Fuse on a 2015 Ram 1500
    It would appear judging from the online version of the owner's manual for your 2015 Ram 1500 that the 12 volt power on the 7-way is tied into the pink, 30 amp fuse in the F30 slot within the power distribution center (PDC). If this is not correct then you would need to reach out to the dealer.
    view full answer...
  • No Power on the Running Light Circuit on a 2000 Chevy Silverado z71 Towing a Boat Trailer
    There is a possibility of a relay or fuse related to tow package wiring either in the power distribution box or in the in-cab fuse panel that you can check. Look in the vehicle owners manual for all fuse and relay locations and check those. If the running light circuit shows no power on the 7-Way on the truck then that does eliminate the problem as being with the trailer. On the chance that it may be related to the trailer, it would most likely be a ground issue. You can check all the...
    view full answer...
  • Troubleshooting Factory Brake Controller of 2015 Dodge Ram 1500 Not Showing Voltage on 7-Way
    Your problem could be as simple to fix as cleaning the pins on the 7-way of the trailer and truck. It's very common that corrosion or dirt prevents the brake controller output circuit from making a solid connection and preventing the controller from being able to work. Also, volt meters typically don't put enough of a draw on a brake controller circuit for it to register as a trailer being connected and allow it to work properly. Try cleaning the pin of the connector and then inspecting...
    view full answer...
  • 12V Fuse Location for 2017 Ram 3500
    I took a look at the online owner's manual for your 2017 Ram 3500. It looks like the fuse related to the 12V pin at the 7-Way should be located at the F30 position inside the power distribution center (in the engine compartment). This will be a 30 amp pink fuse. You will just want to make sure this fuse is present and in good condition. Other fuses on your Ram related to towing are as follows: F28 - Trailer Tow Backup Lights - 20 Amp Blue F29 - Trailer Tow Parking Lights - 20 Amp Blue F53...
    view full answer...
  • Recommended 4-way Connector For 2020 Ram 1500 Classic For LED Tailgate Light Bar
    For your 2020 Ram 1500 Classic you will want to use the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384 you will want to plug in in-between the factory wiring harness and 7-way connector to give you a 4-way connector you can use for your LED tailgate light bar without taking up your current trailer connectors. I included a video of the # 118384 for you to take a look at.
    view full answer...
  • Will T-One 4-Flat Work on 2024 Chevy Silverado Without Throwing Codes
    Yes, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384 will work on your 2024 Chevy Silverado and not throw any codes. This is what most people use it for, to make installing that light bar easier.
    view full answer...
  • Where Is Fuse For 12v Power To 7-way Connector In 2020 Ram 1500?
    I check the owner's manual of your 2020 Ram 1500 and the fuse for the 12v power pin on your 2020 Ram 1500 is located in the fuse box underneath the instrument panel on the driver side, and the fuse is F01 which is a 30amp pink fuse. Check to make sure the fuse is not blown/missing, as this is more than likely causing the pin to not have power. I included a link to a helpful article on wiring for you to take a look at.
    view full answer...
  • How to Add a 4-Way to a Vehicle with a 7-Way Easily
    What you would want is the part # 118384. This harness installs in line with the 7-way at the rear of your Toyota Tacoma and gives you an additional 4-way to match what is on your trailer without the use of an adapter.
    view full answer...
  • Why Would Interior Lights of Horse Trailer Not Function If Outlets Work
    It's probably a breaker that is tripped that controls the interior lighting. See if you can find the breaker box (should be near the battery) and then check to make sure all of the breakers are the right direction.
    view full answer...
  • Locating 12V Trailer Battery Fuse on 2016 Ram 2500
    Based on my research there should be a pink 30 amp fuse located at the F30 position inside the power distribution center under the hood of your 2016 Ram 2500. This fuse is connected to the 12V power circuit on the factory 7-Way so you will want to make sure this fuse is present and in good condition. Please just let me know if you still don't get power at this pin after replacing the fuse and I will be happy to look into this further.
    view full answer...
  • Troubleshooting Horse Trailer Interior Lights Not Functioning Towed by Ram 3500
    Check the 12 volt accessory circuit fuse of the trailer wiring circuit you have on you Ram. The lights you have on your trailer that aren't working are powered by this circuit and often times it's a blown fuse that causes it to stop working since this circuit is active all the time which makes it easier to short out. Or you can check the pins of your 7-way for corrosion on this circuit and clean as needed as that's the other really common issue that causes problems on this circuit. I...
    view full answer...
  • 12 Volt Power All the Time On Brake Output Circuit with Curt Brake Controller on 1999 Olds Bravada
    There should not be power on the brake output wire unless the brake controller is sending back power. It sounds like something might be miswired at the 7-Way. Take a look at the picture I have included that shows the pin out of a vehicle side 7-Way trailer connector to make sure yours is wired the same way. If it isn't then put the wires in the appropriate places. Also check to see if any of the wires are touching each other inside the 7-Way. And if the 7-Way is dirty or corroded that...
    view full answer...
    Image 1 for
  • How To Find Where the Trailer Running Light Relay Is Located On a Vehicle with Factory Wiring
    I am not sure what vehicle this is in reference to but in order to find out where your trailer running light relay is located you have two options. The first option is to check your copy of the owner's manual to see if it is listed here. If it is not listed in your copy of the owner's manual then you will need to check the underside of the lid for the engine bay fuse box. If you can provide me with the year, make, and model of the tow vehicle I can then look this up for you if listed in...
    view full answer...
  • 4-Way Recommendation for a 2012 Nissan Titan with 7-Way
    The T-One Vehicle Wiring Harness # 118384 that you referenced would be the correct product for your 2012 Nissan Titan with a 7-way to also install a 4-way. It will plug inline with the 7-way harness you have on your vehicle.
    view full answer...
  • Trailer Lights Do Not Light Up When Connected to 2007 Subaru Outback with Working Wiring Harness
    Since the new wiring harness on your 2007 Subaru Outback has power the issue must be on the trailer side. It does sound like a ground issue. There are numerous grounds on a trailer so there are a few places to check. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free...
    view full answer...
  • No Left or Right Trailer Stop/Turn Trailer Signals on a 2010 Chevy Silverado 2500
    If you have no trailer stop/turn signals, left or right on a 2010 Chevrolet Silverado 2500, you'll first want to start with taking a look in your owner's manuals for the correct fuse location. I went ahead and did this for you, the #1 fuse location is for the right trailer stop/turn and the #3 is for the left trailer stop/turn in the underhood fuse block. If the fuses are good the next step would be to inspect the terminals inside the trailer connector to be sure there is no corrosion....
    view full answer...
  • Drivers Side Brake and Turn Signal Lights Not Working on a 2012 Ram 3500 4x4 Cummins Diesel
    When a light is only working periodically that is usually an indication of a weak ground connection or a loose wire. But on a newer truck like your 2012 Ram 3500 this does not seem likely. The trailer connector having power is not surprising. That means that the trailer wiring is independent of the truck lights. I would start at the front and work my way back. You could have something going on with the fuse and/or relay (if equipped) on that side. Use the truck owners manual to find all...
    view full answer...


< Previous
123. . .15



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Matthew B
Test Fit:
Matthew B
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Ryan G
Installed by:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.