Bracket Kit for Derale High Performance Stacked-Plate Coolers

See what our Experts say about this Derale Accessories and Parts

• Fasteners Needed to Attach Derale Transmission Cooler to Radiator
  If you're speaking of the rod and pad zip ties, we do indeed offer those as part # D13001. If you'd rather use metal strapping, you can use part # D13063 or the # D13002. For a neater appearance, Derale offers the # D50020 bracket kit. For ease of use, the # D13001 would be your best bet. The rods will actually pass through the gaps between the radiator fins.
  view full answer...
• Is a Heat Sink Frame Rail Transmission Cooler Good Enough for a 1991 Chevy S10
  Heat sink coolers like # D13250 are not as efficient as other coolers but they are great at fitting in narrow spaces. If you want the optimum amount of cooling then you would want to go with a stacked plate cooler # D13403. This cooler is rated as a Class V which means it is very efficient. We also have # D13402 which is a little smaller and classified as a Class IV. You would also need mount kit # D50020 if you go with the smaller Class IV cooler. I have included a link to our FAQ article...
  view full answer...
• Parts Needed to Install a Transmission Cooler on a 2004 Buick Rainier With 3600 Stall Converter
  My research shows that you will need to add the Derale Snap-In Radiator Adapter Fitting, # D13035, to the Derale Transmission Cooler Kit, # D13504, that you selected, to complete the installation on your 5.3 liter V8 GM motor. This cooler would work fine to help cool the transmission for towing. It sounds as if you are building a street strip application, with a 3600 stall converter, so I would recommend going with a Derale Atomic-Cool Remote Transmission Cooler Kit, item # D13950. This...
  view full answer...
  
• Transmission Cooler Recommendation for a 2015 Toyota 4Runner
  Transmission coolers don't have specific fits, but if you have room for the # D52506 in front of your radiator/AC condenser then it would work well. It measures 13" Wide x 9-3/16" tall x 2" deep. This is one of the most efficient coolers on the market that would work great on your vehicle. To install this cooler you will need a few other components. Part # D50020 for a bracket kit, part # D98200 for a fittings (you'll need two of these), hose clamps part # D13008, and rubber hose part # D13017.
  view full answer...
• Transmission Cooler Recommendation for a 2009 Ford F-150 STX 4.6L
  We have a few excellent transmission coolers that would be great additions to your 2009 Ford F-150 STX, but they will each be a little larger than your factory cooler and rightfully so since you will be towing a 7,000 lbs trailer. My best recommendation is the Derale Stacked-Plate Transmission Cooler Kit, # D13402. The stacked-plate coolers are the most efficient tranny coolers on out there, so you can rest assured that it will be doing the most to keep your transmission fluid cool when...
  view full answer...
• Can the Factor Transmission Cooler be Bypassed on a 2004 Jeep Grand Cherokee Laredo 4.0
  The transmission coolers that we carry are designed as supplemental coolers and not to replace a factory cooler. You could bypass the factory cooler but you would need the largest cooler that will fit in the available space in the engine compartment or you would need a cooler that has its own electric fan. For a large cooler or one that is very efficient I recommend # D54006 which is a stacked plate design (most efficient). It measures 13 inches wide by 13-11/16 inches tall by 2 inches...
  view full answer...
• Will a Stacked Plate Transmission Cooler Fit a 2006 Chevy Avalanche
  You can install transmission cooler # D52506 on your 2006 Chevy Avalanche because coolers are not vehicle specific. If you have the available space under the hood you can install it. The cooler is 13" wide x 9-3/16" tall x 2" deep. It does not come with hose, clamps, or provisions to mount it. To mount it you can use kit # D50020. For clamps use # D13008. And for hose use # D13017. And to avoid cutting and flaring factory lines you can use fitting # D13035.
  view full answer...
  
• How to Determine if Transmission Cooler Will Fit In Front of the Radiator on a 1999 Chevy Silverado
  For transmission coolers you have to go by their dimensions compared to the available space where you want to install it. Stacked plate cooler # D51908 is 13 inches across, 7-7/16 inches tall, and 2 inches deep. If you have more than this much space in front of the radiator then it will fit your 1999 Chevy Silverado. This particular cooler is not a kit so it doesn't come with any hose or mounting components. To mount it you can use # D50020. For hose you can use # D15799 and clamps #...
  view full answer...
• Best Transmission Cooler Recommendation for 2013 Chevy Silverado with 6.2 liter V8
  Stacked plate transmission coolers are by far the most efficient ones available. The largest one we have is the part # D54006 which measures 13" Wide x 13-11/16" tall x 2" deep. For a bracket kit you would need the part # D50020, for AN fitting adapters you'd need two of the # D98200. For the fitting for your truck you would want the part # D13035. For a 5 foot section of hose we have the part # D13016.
  view full answer...
• Transmission Cooler Recommendation for 2012 Ram 3500, 6.7 Cummins with 6 spd Automatic
  The best way to install a supplemental transmission cooler in line with a factory transmission cooler is to put the supplemental cooler after the factory cooler. To do that you will need to determine which of the lines from the factory cooler is the outlet. To do that you will want to start your truck when its cold, put it in drive for about 10 seconds with the brake on, put it back in park and shut the truck off. Next you will want to grab both transmission lines feeding into the cooler....
  view full answer...
• Can Two 40 Row Derale Transmission Coolers be Used in Place of a Factory Cooler
  Yes! You can use 2 of the Derale 40-row coolers # D54008 to cool the transmission fluid on your prostreet car. The stacked plate design is the most efficient at cooling. To optimize cooling make sure the coolers are mounted where they can get the most air flow (right behind the grille). I also recommend a couple of mount kit # D50020 and some hose. For a 25 foot length with an inner diameter of 11/32" use # D13007. For 25 feet of a 3/8" diameter use # D13017. We also have a 4-pack of stainless...
  view full answer...
• Can I Mount Derale 10-Row Stacked-Plate Cooler to Bumper of 2002 Jeep Liberty
  I spoke with my contact at Derale and he confirmed that the Derale 10-Row, High-Performance, Stacked-Plate Cooler # D51008, which you referenced, is a fit for your 2002 Jeep Liberty and can be mounted to your front bumper. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Transmission Cooler Recommendation for 2007 Dodge Ram with Cummins Diesel
  For a full size diesel truck you'd need all the cooling power you can get if you plan to bypass your factory cooler. Stacked plate coolers are the most efficient styles of coolers around so the part # D54010 would be your best option. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• When Installing a Transmission Cooler Can the Inlet/Outlet Ports Face Down
  Yes, you can install a transmission cooler like the Derale 25-Row Stacked-Plate Cooler part # D52506 so that the inlet and outlet ports are facing down. The inlet and outlet ports do not need to be pointed in any one specific direction as the line pressure will work to pump the fluid though the inlet of the cooler and out the outlet to be returned back to the transmission. In order to install the above you will need the following: Derale -6 AN Female Swivel part # D98200 Derale High-Temperature...
  view full answer...
• Will the Derale 25-Row Stacked-Plate Cooler Fit a 2005 Chevy Silverado 2500
  The stacked-plate transmission coolers like the Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings part # D52506 do offer superior cooling power when compared to plate-fin and tube-fin designs. However, they are also much thicker at 2" which means you will need to make sure you have this much depth in addition to the length and height of 13" wide x 9-3/16" tall. There should be plenty of space behind your grille for this cooler so I don't think you will have any issues....
  view full answer...
• Parts Needed To Install a Derale High-Performance, Stacked-Plate Cooler on a 2015 Chevrolet Tahoe
  I do have an option for you but the part that you referenced, the Bracket Kit for Derale High Performance Stacked-Plate Coolers part # D50020 is just a bracket kit for a stacked-plate cooler like the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52506. In order to use the above stacked-plate cooler you will need a few items which I have attached for you below but they will vary based on what size transmission lines your 2015 Chevrolet Tahoe uses. The most common is 3/8"...
  view full answer...
• Recommended Transmission Cooler for a 2013 Chevy Tahoe
  I have the perfect transmission cooler option for you. Generally speaking, the best transmission cooler to use would be the largest one you have available space for. The best place to install a transmission cooler is in front of the radiator/condenser behind the grill on your 2013 Chevy Tahoe. I recommend using the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52508 because the plate and fin technology incorporated into this transmission cooler is far more efficient than...
  view full answer...
  
• Recommended Transmission Cooler and Parts Needed for Installation on 2011 GMC Sierra
  For your 2011 GMC Sierra I recommend using a Derale 10,000 Series Stacked-Plate Cooler with -10 AN Fittings, like # D52510. I spoke with my contact at Derale and he said these coolers are popular among Allison transmission owners. When choosing a transmission cooler, the largest cooler that will fit in the space available in your engine compartment is typically the best. Generally speaking, the larger the cooler the better the cooler performance. A stacked-plate cooler is the most efficient...
  view full answer...
• Can I Bypass the Factory Transmisson Cooler on a 2007 Nissan Frontier
  We do not recommend bypassing the factory cooler with a supplemental transmission cooler, but if you are going to do so, I strongly suggest using the largest and most effective cooler that will fit in your engine compartment. Keep in mind, these transmission coolers are designed to be supplemental coolers to the vehicle's cooling system, not independent coolers. As far as coolers go, the most effective design is a stacked-plate cooler like the Derale High-Performance Transmission Cooler,...
  view full answer...
• Most Efficient Transmission Cooler Recommendation for 2015 Chevy Silverado 1500
  The most efficient style of transmission cooler is the stacked plate style like the part # D54012 that you referenced. So for the largest one in this style you'd want the # D54010 which measures 13W x 13-7/8T x 2D Inch and you'd have an extremely efficient cooler. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Recommended Transmission Cooler For 2002 Ford F-250 With 7.3L Engine And 4R100 Transmission
  The Hyper-Cool Remote Cooler you will want to select depends on the size of the coolant line you have on your 2002 F-250 with the 7.3L engine. If the lines you have on your transmission are 8 AN then the cooler I recommend is part # D15960. This includes the cooler with fan, and all the needed hardware. If you need a cooler with 10 AN fittings then I recommend part # D15875. You may also need the following parts: 10 AN Hose Fittings, part # D98203 Stacked-Plate Cooler Bracket Kit, part...
  view full answer...
• Fittings and Other Parts Needed to Install Transmission Cooler D52508 in a 2010 Chevy Tahoe
  Derale Snap-In Radiator Adapter Fitting # D13035 is recommended when installing a transmission cooler on the 2010 Chevy Tahoe. I have linked a video featuring this fitting for you. In addition to the fitting and the core, # D52508, you will also need a bracket kit # D50020 to mount the cooler, hose clamps, # D13008, and about 10 feet of hose, # D15700. We also have a 25 foot length of hose, # D15799, if you want to err on the side of caution; especially if you are also installing a bypass...
  view full answer...
• What Pressure are the Derale Transmission Coolers, Fittings and Hoses Rated For
  All of the Derale transmission coolers, fittings and hoses that we carry are tested for use up to 300 psi. Along with this cooler you might need the following parts for installation as an engine oil cooler: 10 AN Hose Fittings, # D98203 Remote Engine Oil Cooler Installation Kit, # D15752 Stacked-Plate Cooler Bracket Kit, # D50020 If installing this cooler as a transmission cooler you might need the following parts: 10 AN Hose Fittings, # D98203 Stacked-Plate Cooler Bracket Kit, # D50020 And...
  view full answer...

Do you have a question about this Accessories and Part?