Wheel Covers Hubcaps Specs:
Features:
Upgrade the rear wheel of your Ford truck with this durable, ABS plastic hub cover. Integrated lug nut covers protect your lug nuts from dirt and moisture. Cover snaps onto your lug nuts to give your wheel a clean look. Fits 10 on 225mm bolt pattern.
Installation Notes:
Product is to be used on aluminum wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
Upgrade the front wheel of your Ford truck. Durable, ABS plastic hub cover with Integrated lug nut covers protects your lug nuts from dirt and moisture. Pop out center gives you hub access to grease your wheel bearings. Fits 10 on 225mm bolt pattern.
Installation Notes:
Product is to be used on aluminum wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
Replaces 1 mirror-polished stainless steel wheel cover on the front of your Ford truck. Fits a 19-1/2", 8-lug wheel with 10 hand holes. Hardware included.
More Information >Wheel Covers Hubcaps Specs:
Features:
Replaces 1 mirror-polished stainless steel wheel cover on the rear of your Ford truck. Fits a 19-1/2", 8-lug wheel with 10 hand holes. Hardware included.
More Information >Wheel Covers Hubcaps Specs:
Features:
Stylish, durable stainless steel wheel covers with a mirror polish will dress up your Ford that has 19-1/2", 8-lug wheels with 8 hand holes. Includes 4 hubcaps, hardware and a dual-tire inflation kit.
More Information >Wheel Covers Hubcaps Specs:
Features:
These stylish wheel covers fit your vehicle that has 19-1/2", 8-lug wheels with 8 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.
More Information >Videos
for Wheel Well Liner
Help Articles
for Wheel Well Liner
Expert Answers
for Wheel Well Liner
The Gen-Y Weld-On 2" Receiver Tube #325-GH-003 is 2-7/8" wide on the tube and 3-1/2" wide at the collar. The overall length is 12".
view full answer...I recommend going with the Timbren Suspension Enhancement System #TFRSDJ for your 2024 Ford F-450 Super Duty because it's designed better for pickup truck-type applications. The other Timbren kit #TFRTT350J is designed more for…
view full answer...Your Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball #C60601 lifts the pin when that lever is lifted. Because that lever is broken off you will need to lift that pin and turn it 90…
view full answer...If you are asking for a suspension upgrade kit that has adjustable bags that do not use air, I am not aware of any that exist. If you are just asking for a suspension upgrade kit that does not use air, then we have the Timbren Suspension…
view full answer...The hub covers that I have are only available in chrome ABS finish. The Quick Trim Chrome Finish Trailer Hub Cover 6 on 5-1/2, part #QT655C, is a cover that will fit a 6 on 5-1/2 inch bolt pattern wheel. The Quick Trim Chrome Finish Trailer Hub…
view full answer...For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes…
view full answer...Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since…
view full answer...Although we do not have a direct replacement for the Dicor V19582-EJN, the Replacement Wheel Master Lug Nut Cover for Wheel Liner - Qty 1 #WMRMT9061 will fit a 22 millimeter lug nut. From what I have found, the jam nut you are looking for has been…
view full answer...The Lippert Components Kwikee 32 Series #LC3722617 referenced in your question includes the standard drive operation (5316) but not a switch kit. The Kwikee 32 Series Step #LC3722615 that you also referenced includes the Logic Control Unit (9510)…
view full answer...Based on my research, your 2006 Georgie Boy Pursuit 3480DS was built on a Ford F-53 chassis and has a GVWR of 20,500 lbs, though I do recommend verifying this just to be sure. If so, I checked with SuperSprings, the manufacturer of SumoSprings, and…
view full answer...The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to…
view full answer...For your 2021 Ford F-53 Chassis motorhome with a 24000lb GVWR I recommend the Sumo Springs Rebel Custom Helper Springs #SSF-173-40-2 for the front which have a 3000lb load leveling capacity. For the rear you will need the Sumo Springs #SSR-183-54-1…
view full answer...Filter Products (12)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD