1985 Ford F-150, F-250, F-350 Wheel Liners

Hey Ron, thanks for reaching out! We have two different steering stabilizers for your motorhome on a 2018 Ford F-53 chassis; the Roadmaster Reflex and the Roadmaster Exact Center. The Exact Center was supposed to be an upgrade to the Reflex but…

The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be…

The Gen-Y Weld-On 2" Receiver Tube #325-GH-003 is 2-7/8" wide on the tube and 3-1/2" wide at the collar. The…

Using the SumoSprings Maxim Custom Helper Springs #SSR-180-54-1 will greatly reduce the amount your 2020 Winnebago Adventurer 36Z leans to the passenger side. You will want to install these on both sides otherwise you will have very different…

I recommend going with the Timbren Suspension Enhancement System #TFRSDJ for your 2024 Ford F-450 Super Duty because it's designed better for pickup truck-type applications. The other Timbren kit…

Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not…

The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part #SSR-180-54-1 for the rear and part #SSF-170-40-2 for the front.

For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that…

According to my research you have a 10 on 11-1/4" or 285mm bolt pattern on your 2018 Freightliner M2 which means the correct hub cover for you is the Phoenix USA Hub Cover part #PXQH1200F. However, in…

For your 2008 Workhorse W22 Chassis, I recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK13-RSSA. This system has a tempered steel spring that works when compressed to push back to center and…

In regards to the Roadmaster Reflex Steering Stabilizer part #RM-RBK13-RSSA, the chassis bracket which is the larger of the two will be installed on the passenger side preferably but can be installed on the driver side as well. That said, I…