Comparing Dexter Electric Trailer Brake Assemblies 23-181/23-180 and 23-465/23-464
Updated 02/09/2023 | Published 02/08/2023 >
Products Featured in This Question
Question:
What is the diff between the 023-181-00 electric brake and the K23-465-00
asked by: Vern H
Expert Reply:
The only difference between the Dexter Electric Trailer Brake Assembly part # 23-181 for right hand or part # 23-180 for left hand and the Dexter Nev-R-Adjust Electric Trailer Brake Assembly part # 23-465 for right hand or part # 23-464 for left hand is the adjustment. The former are manual adjust brakes and the latter are self-adjust brakes. The manual adjust brakes require you to adjust them for even pad wear every so often whereas the self-adjust do this automatically. The adjustment procedure entails crawling on the ground under the trailer and using a screwdriver to spin the star wheel inside the brakes from an access hole in the rear. It's not hard to do, it just takes a bit of time and is something you'll need to remember to do every so often. The star wheel basically pushes the brakes out, closer to the drum for more contact as the pads wear down.
These brakes are both direct fits for Dexter, Lippert (LCI), and AL-KO 7,000 lb axles and measure 12" diameter.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Aluminum Liger Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Glossy Black
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Adapter Rails for 5th Wheel Hitch - GM Towing Prep Package
- Search Results: 023~180~00
- Search Results: 8~219
- Search Results: dexter 8 219
- Search Results: 008 219 13
- Q&A: Differences Between Dexter 42866UC3-EZ and 8-219-4UC3-EZ Trailer Brake Hub/Drums
- Shop: Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 8,000 lbs
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Search Results: 021~043~01
- Search Results: dexter axle dust cap
- Shop: Wheel Well Guards
- Shop: Wheel Liners
- Shop: Trailer Hitch
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: 9/16 lug nut
- Q&A: Mounting a Trailer Winch On a Tilt Trailer So Cable Doesn't Rub On Tilt Portion
- Q&A: How to Tell if Trailer Brakes Are Skidding When Setting Up Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring
- Video: Complete Breakdown of the MaxxFan Roof Vent w/ 12V Fan
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Q&A: Correct Replacements for Dexter 023-359-00 Left Hand and 023-360-00 Right Hand Braking Assemblies
- Q&A: Do You Have Zinc Plated 3-1/2" Long Wet Bolts?
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles

