2000 Lamborghini Diablo Windshield Covers

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

Hey Jon, I attached a picture of the etrailer windshield cover part #288-06603 on a similar full size Ford truck as yours. The customer said it did fit but was a little tight on the mirrors so it would work for you.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Michael, the WeatherTech Roll Up SunShade Kit - Front and Side Windows #WT42UK that you referenced is basically a friction fit in how it attaches to the windows. Basically they are light enough and stiff enough that you would just push them up…

Hey Jesus! The #e98ZR comes with an alignment collar and a hitch pin. The Curt #C31006 does not include these and costs a little more. Outside of that, they are the exact same spare mount with different branding. What rig are you setting this up on?

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

Hi Jordan! The Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle #DX76ER uses bearings and seals that are made overseas. They aren't really "branded", per se, but Dexter does have them made specifically for them. If you…

Hello Mark, Based on what you described with the driveway angle and the additional weight you plan to carry on the hitch, I would recommend going with the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-130-54. The main difference between the…

Hi Jeff, great question, and you’re definitely on the right. I know how tiring it can be when the RV feels like it’s leaning or getting pushed around, especially in wind or on curves. The Timbren kit part #TFER35092LB is a solid upgrade if you’re…

It sure is Bill and thanks for the pictures! The Andersen Aluminum Ultimate 5th Wheel Connection 2 Gooseneck version item #3220 will indeed work with the basic model Lippert Rhino pin boxes. The Kingpin Coupler Block is going to attach directly to…

Hey Roger, a set of chains on all 4 of your tires like the Konig part #TH01571255 is going to give you the best traction for your Sprinter. I really like these Konigs because of how well they improve traction, how easy they are to install, and how…