Windshield Cover Specs:
Features:
Say goodbye to scraping snow and ice with this winter windshield cover. Put it on before the storm, then remove, shake it clean, and store in the included bag. No frozen fingers, just clear windows and a head start on your day.
More Information >Windshield Cover Specs:
Features:
Weatherproof, double-sided windshield cover fits the exterior of your vehicle. Attaches securely inside with hooks for the front doors. No more standing out in the cold and slush while you scrape and brush.
More Information >Windshield Cover Specs:
Features:
When the weather piles it on, we have got you "covered" with a double-sided windshield cover that installs on the outside of the vehicle. No more scraping - just remove the cover and you are ready to go.
More Information >Videos
for Windshield Cover
Help Articles
for Windshield Cover
Expert Answers
for Windshield Cover
It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…
view full answer...Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…
view full answer...If the Truxedo tonneau cover happened to have the Truxedo TS rail kit (we can't get it anymore) then use the Yakima Overhaul HD Ladder Rack part #Y01151-5755 would fit with it. If you do not have those rails though it would not work.
view full answer...Hey Jon, I attached a picture of the etrailer windshield cover part #288-06603 on a similar full size Ford truck as yours. The customer said it did fit but was a little tight on the mirrors so it would work for you.
view full answer...Hello Dan, thanks for reaching out. We can definitely provide the full flat tow system for your 2026 Ford Maverick XLT Hybrid. Here is what I recommend: - Demco Tabless Base Plate Kit - Removable Arms #DM38CV - etrailer XHD Non-Binding Tow Bar - RV…
view full answer...Hey Lauris! Is the Brinkley prepped for a generator or are you saying it has room for one? If it doesn't have some kind of generator prep you're going to need a lot of parts from Cummins to install #CM44MR. You will have to add a fuel tank,…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Great Question Steve, Yes, The Cummins Onan QG 7000i Dual Fuel part #CM44MR will work well to replace your current 4,000 watt generator in the SMC horse trailer. You’ll be gaining quite a bit more power, enough to comfortably run multiple AC units…
view full answer...Hey Zach, you’re thinking about it the right way, but there are a few big things to be aware of before you commit. First, we do have the QG 2800i Onan Generator #CM52ZR which runs on gas so that's what I recommend. That’s usually the go-to for…
view full answer...Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…
view full answer...Hi Dennis! The Hellwig Load Pro 35 Heavy Duty Helper Springs with Custom Mounting Kit - Above Axle #HE93XR can potentially raise an unloaded truck a little, but it's going to be very minimal and will really only happen if your suspension is…
view full answer...Hey Michael, the WeatherTech Roll Up SunShade Kit - Front and Side Windows #WT42UK that you referenced is basically a friction fit in how it attaches to the windows. Basically they are light enough and stiff enough that you would just push them up…
view full answer...Filters
- 3 results