The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. The Curt item #C26VV is a class III hitch with a…
The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…
The best trailer hitch for your 2024 Toyota RAV4 Prime is our etrailer Trailer Hitch Receiver #e23ZR because it has the standard hidden crosstube, but the thing that sets it apart is the matte black finish because it looks better and does a better…
To activate the brakes on a trailer with your 2024 Toyota Grand Highlander you'll need a 7-way connector and brake controller. To switch over from your 4-pin connector you can install the #ETBC7L. This will plug…
The 2 inch trailer hitch I recommend for your 2024 Mazda CX-5 is the etrailer Trailer Hitch #e98902. This is the best due to its matte black powder coat which resists the inevitable scuffs better than other hitches.
While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you…
It looks like you are referring to the Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black #311-SWFA19A45 and the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black…
Based off your description I believe you're talking about the "Blower Wheel" which can be replaced with part #ADV49FR. The fan blade on your…
For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like…
In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you…
I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you…
Filter Results
