The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Scott! For your 2022 Hyundai Kona N Line I recommend the Curt #C87DR (1-1/4" receiver) or #C98QV (2" receiver). What are you using the hitch for? Since the Class III with a 2" is available I would choose that over the 1-1/4"…
Hey Timothy, this is a great question but what Curt means by vertically in terms of bike racks for the Curt hitch part #C47MJ is a different style of bike rack but I can see the confusion. For example a vertical bike rack is the Yakima HangTight part…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Alex! The legs on the Front Runner Roof Rack item #FR45MJ are adjustable between 2.9"-3.3" tall. The load bars are just under 1" thick. Together they are going to sit 4.25"-4.65" tall above the OEM rails. I do not know…
Hello Cory. The difference between the two is that the Air Lift LoadLifter 5000 #AL88399 has an internal jounce bumper (bump stop), and the Air Lift LoadLifter 5000 #AL57399 does not. Both products have a 5,000 pound load leveling capacity, and are…
The trailer hitch receiver that fits your 2024 Toyota RAV4 and has the best clearances - both bumper clearance and ground clearance - is the EcoHitch, with the correct fit for the '24 RAV4 being the following: - EcoHitch Hidden Trailer Hitch…
Hi Anthony; the forces applied to the #C22HR hitch and the frame from a vertical hanging bike rack (bike racks that require the bicycles to be hung / mounted vertically) are different from your standard platform rack like the #HLY94FR or hanging bike…
I have seen the Roadmaster Universal Stop Light Switch Kit #RM-751000 used as an alternative to tapping into the brake switch wiring. There are 3 wire connections for this switch. First a fused power wire, a ground wire and the output wire for the…
The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…
A gooseneck trailer, or in this case a converted 5th wheel trailer using Ranch Hitch, #AM3139, will still need safety chains as if required by law in the states you will be traveling. You will need to check with the Department of Transportation for…
Thanks for the great service. The order arrived at my doorstep yesterday afternoon. Thank you for making sure the order was complete. I installed the hitch and wire kit last night with no problems. The instructions were perfect. Bruce
Filters
