Ford Ranger Truck Bed Bike Rack

Hey Travis, yes the Inno Truck Bed Cargo Rack #INRT101-65 does come with the C-clamps and the crossbars needed to complete a rack in the bed of your truck. Then for a bike rack the Yakima HighSpeed roof bike rack part #Y78DJ would work as well. This…

Yes, the Half Tailgate Pad Bike Rack part #BDW79QB that you referenced does work with your two electric fat bikes.

For your 2024 Ford F-250 I recommend checking out the Half Tailgate Pad for Trucks #BDW79QB. This is a tailgate pad that just drapes over your tailgate and gives you the ability to carry up to 2 bikes securely and easily. The pads are 1" thick,…

Hey Ron, the Yakima HighSpeed roof bike rack part #Y78DJ is compatible with your Rhino Rack Vortex roof crossbars and also fits the 12 mm, 15 mm, and 20 mm thru axles so it would work great for you unless you have a different thru axle size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We sure do Kenny! Just stay away from the ATX model if you end up going with the 2025 GMC Canyon. There's no baseplates that will fit with that front end. The same with the ZR2 Bison on the 2025 Colorado. For a 2025 GMC Canyon we have the…

Hi Tom; to flat tow your 2025 Chevy Colorado Trail Boss you will need a base plate kit, tow bar, safety cables, wiring, and a supplemental brake system. For a complete setup I recommend the following: -Roadmaster Direct-Connect Base Plate Kit -…

Hi John; we have two options from TorkLift for your 2025 Sierra 2500 with a 6-3/4' bed and factory hitch. You can choose from the following: -TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL86NR (powder coated steel) -TorkLift Tie…

Yes, the Inno Velo Gripper Bike Rack #INRT201 will indeed fit your 2017 Chevy Colorado.

Hey Andy, thanks for reaching out! The trailer hitch I recommend for your 2025 Chevy Colorado is the Curt #C78VV, and then for a brake controller I really like the Redarc Tow-Pro Liberty #RED24FR (along with the universal wiring harness #RED69FR)…

The Yakima Holdup part #Y02443 that you referenced is designed to fit wheels that are between 14 and 29 inches in diameter. There isn't an adapter available to allow the rack to fit larger tires, but you can try deflating the tires a bit to see…

The Thule Insta-Gater Pro Truck Bed Bike Rack part #TH93VR shouldn't be used on a bike with fenders as you'd have to place the hook before the fender and that could create a weak hold. That said, you can secure the rack to either the front or…