Ford Ranger Truck Bed Bike Rack

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For your 2024 Ford F-250 I recommend checking out the Half Tailgate Pad for Trucks #BDW79QB. This is a tailgate pad that just drapes over your tailgate and gives you the ability to carry up to 2 bikes securely and easily. The pads are 1" thick,…

We sure do Kenny! Just stay away from the ATX model if you end up going with the 2025 GMC Canyon. There's no baseplates that will fit with that front end. The same with the ZR2 Bison on the 2025 Colorado. For a 2025 GMC Canyon we have the…

We have bike racks like the can attach to the top of a hard tonneau cover like the very cost-effective Hollywood Racks Truck Bed Bike Carrier #HRT970. This is a bolt-on product that holds your bike at the fork that would require you to drill through…

Hi Tom; to flat tow your 2025 Chevy Colorado Trail Boss you will need a base plate kit, tow bar, safety cables, wiring, and a supplemental brake system. For a complete setup I recommend the following: -Roadmaster Direct-Connect Base Plate Kit -…

Hi John; we have two options from TorkLift for your 2025 Sierra 2500 with a 6-3/4' bed and factory hitch. You can choose from the following: -TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL86NR (powder coated steel) -TorkLift Tie…

Hey Andy, thanks for reaching out! The trailer hitch I recommend for your 2025 Chevy Colorado is the Curt #C78VV, and then for a brake controller I really like the Redarc Tow-Pro Liberty #RED24FR (along with the universal wiring harness #RED69FR)…

Yes, the Inno Velo Gripper Bike Rack #INRT201 will indeed fit your 2017 Chevy Colorado.

Hey Paul, The EcoHitch Hidden Trailer Hitch Receiver #EH87CR would not require you to remove the rear bumper or tail lights and would be a bolt-on installation. It does require you to notch out a hole in the rear fascia for the receiver tube to stick…

Yes, the Half Tailgate Pad Bike Rack part #BDW79QB that you referenced does work with your two electric fat bikes.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Thule Insta-Gater Pro Truck Bed Bike Rack part #TH93VR shouldn't be used on a bike with fenders as you'd have to place the hook before the fender and that could create a weak hold. That said, you can secure the rack to either the front or…