Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…
The direct replacement for your Dutton-Lainson 203925B jack would be part #DL22560. According to Dutton-Lainson, the jack would indeed be compatible with your existing mounting plate. I've linked to a product demonstration video featuring the…
When installed on your 2019 GMC Sierra 1500 the Curt Front Mount Trailer Hitch #C31088 will extend close to even with the front bumper under the truck. I have attached an image of the hitch installed on your truck that you can use for reference. We…
Glad to hear that you will be using the Draw-Tite #65078 to mount the (discontinued) Superwinch Tiger Shark Off-Road Winch SW1595200 to the front of your 2019 Chevrolet Silverado 3500. To easily swap the Tiger Shark winch from the front of your…
The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…
I'm happy to clear all this up for you, and let's start with the dual cam systems compared to the friction-control systems like your Equal-i-zer. While neither are going to completely and totally prevent all sway, you are right that the dual…
You will need the Replacement Mounting Hardware Kit #21-53468PK for the Stainless Westin PRO TRAXX Oval Nerf Bars #21-534680 on your 2021 GMC Sierra 1500. This kit will also fit the Black #21-534685 steps as well.
While I don't have an exact figure I can give you I can show you what the Curt Front Hitch part #C31088 looks like installed and from there we can tell that it's going to reduce the front ground clearance by 3 inches give or take.
It sounds like you have a spindle that uses the Inner Trailer Hub Bearing, item #25580, that has a 1.750 inch inner diameter. The outer #15123 bearing has a 1.250 inch inner diameter. I would check the seal surface on the spindle to be sure that it…
I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…
The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31088 you were looking at is confirmed to fit your 2019 Chevrolet Silverado 1500 LT 4WD with the 5.3L V8. You are correct that you will need to trim the fascia to allow the hitch to…
Hey Bill, A 225/75R15 tire would have a 9.25" width and you need to have a minimum of 1" between the tire and frame so we'll add the two together for a 10.25" space needed for the tires on both sides. That being said you also have…
