Custom Fit 2019 Toyota Tacoma Accessories

Hey Joe, The track mount kit referred to in the item description of the Rhino-Rack Reconn-Deck Truck Bed Rack Towers #RR62FH is referring to OEM utility rails in the bed of the truck, not a separate Rhino-Rack branded kit. To fit different vehicle…

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

I recommend going with the Redarc Tow-Pro Elite #RED44FR for towing with your 2022 Toyota Tacoma for a few reasons; not only does it have a totally customized install when you pick up the Adapter #RED99FR and Mounting Panel #331-TPSI-002, but it also…

I have a great solution for you! I really like the Firestone Ride-Rite Air Helper Springs that you looked at they are by far the best bags for the money. The major reason is the way the air bags are connected to the caps on the end Firestone uses a…

For your 84 spindle the correct nut would be #165686 which is a 1 inch spindle nut.

Thank you for your VIN. I was able to use this and determine that you need the CE Smith Trailer Hub Assembly part #CE13311 which comes pre-greased.

Thanks for the photo! Using the VIN I was able to gather the necessary information needed to help you find the correct idler hubs. For this, I recommend the CE Smith Trailer Hub Assembly part #CE13311. This hub uses a L44649 inner/outer bearing,…

The SumoSprings kit #TSS-106-40 does for sure fit your application based on the dimension you just mentioned of 7-3/4 inches from the spring plate to the bottom of the trailer frame. This kit works with dimensions here that range from 6 to 8-5/8…

The Timbren kit part #TTRA1702 is 2-3/4 inches tall and would work great for you to give you additional support. This will provide up to 1,000 lb of additional support.

The correct Firestone Ride Rite kit for your 2012 Toyota Tacoma is the Firestone kit part #F2407. This is the correct kit for the 2WD PreRunner models like what you have.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I may have a solution that will save you some money and work. I spoke with our tire expert and his suggestion was to lower the tire pressure a little until you are comfortable with the way the trailer handles and rides. We always recommend using the…