Custom Fit 2016 GMC Sierra 1500 Accessories

The plug in location for a brake controller on your 2016 GMC Sierra 1500 is in the black electric junction box located to the left of the brake pedal. I've attached a photo showing where this is at for a plug in like the part #3016-S which would…

Since your 2016 GMC Sierra 1500 already has a 7-way trailer connector at the rear of the vehicle then all you will need to install a brake controller is the brake controller and wiring harness adapter. I am not sure what the "work model" of…

There is existing wiring under the dash on your 2016 GMC Sierra 1500. Your truck comes with a pre-wired factory tow package which means it is set up to easily install a brake controller. The plug-in wiring harness sits right under the dashboard above…

For your 2016 Chevrolet Silverado 1500 Z71 with a truck bed camper and towing a trailer I recommend going with the RoadActive Suspension Leaf Spring Enhancement Kit #RAS54FR. This kit will give you the best enhancement to your suspension as it not…

I do see the back of the Replacement Step Pad #AA2090161 has 8 ribs while the back of the Replacement Step Pad #AA2090133 has 10 ribs.

According to Yates Rubber, the #YR12244-125EC roller technically carries a 400 lb capacity, but the roller shaft like #CE10727A and the mounting bracket like #CE10305G do most of the heavy lifting. This is the strongest keel roller they offer. My…

I have another option for you, but we do not currently carry any Keel Rollers that would fit a 1-5/16" pipe. Instead I recommend going with the Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 12" Long - 5/8" Shaft…

I can help you find the correct sized keel rollers that you need. Most Keel Rollers fit either a 5/8 inch shaft or a 1/2 inch diameter shaft. You want to know the diameter of the shaft that the rollers fit on. The easiest way to figure out the length…

The 12 inch measurement for the product description has to do with the size bracket that it will fit. If you only have 1/2 an inch of a gap between the Yates Keel Roller #YR12244-125EC and your bracket you will be fine. It is okay for there to be…

Since you have a Yates roller 12244 currently the correct replacement would be the part #YR12244-125EC that you referenced. Then for a replacement shaft with pal nuts you'd want the part #CE10727A and you'd be set.

Hello Nick, The Hitch ball for the Curt #C60642 will sit above or slightly forward of the rear truck axle. I attached 2 pictures of the underbody of the 2022 GMC Sierra, as you can see that the Curt #C60642 sits in the same spot as the B&W…

I went ahead and called my contact at TruXedo, and they confirmed that there is no difference between the replacement "cover" and the replacement "tarp." If you want me to confirm a replacement cover for your vehicle, I would be…