Michael, yes it does. The Dometic 12v RV furnace #DMC64MR includes knockout options on the bottom as well as the sides, so you can duplicate your Jayco’s original duct layout. That’s one reason it’s such a popular swap for Atwood models. Others - if…
Hey Jim. To replace your LCI model 377199 you can use the Lippert High-Speed Power Stabilizer Jack item #LC369774 or item #LC298707. The Lippert 377199 is no longer available but the item #LC369774 or item #LC298707 are the modern replacements. They…
Hey David, thanks for reaching out! The closest combination we can get for you is the SmartPlug RV/Marine Data Port Inlet #SM36MJ and then getting the Keystone Single Jack Ethernet Connector #SM38MJ along with the ethernet adapter for your Starlink…
Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…
Hey Larry, the Smartplug part #SM96MJ is the correct part you are looking for as this has ability to have an ethernet connection for your Starlink and a coax for the cable connection. For the ethernet connector you would need the part #SM38MJ and…
Dexter recommends a SAE 90, SAE 80W-90 or SAE 75W-90 oil to be used. I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs #XLPROLUBE as it is a synthetic 90 weight oil that helps reduce friction and to keep bearings cool. Since your cap was…
I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs #XLPROLUBE. This oil is formulated to work with all oil bath style hubs. It is a synthetic 90 weight oil that reduces friction and works well in cold and hot weather applications.
Thank you for all of the information and photos - it really helps give me a good idea of what you have/need. The parts that you asked about are listed below but I will say you may need a new axle as well if the location where the current leaf springs…
The Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle #XLPROLUBE is synthetic 90 weight oil. Attached are some review videos for you to check out.
The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…
I can understand why this might be confusing, when it comes to the different ratings. Rolling capacity is essentially just the capacity of the winch to pull a load that is moving up an incline; technically the capacity that is listed is the maximum…
