Videos
for Ram 3500 Owners
Help Articles
for Ram 3500 Owners
Expert Answers
for Ram 3500 Owners
Hi Joe, We have a couple options for convection microwaves with an air fryer, and if you can replace your High Pointe EM925AWW depends on the amount of space you have. Your current microwave is 19-1/8" wide x 11-5/16" tall x 14-11/16"…
view full answer...Hey Louis, the closest option for a convection microwave to what you are looking for is the High Pointe part #HP36ZR which has an overall dimension of 20-1/2" wide x 12-7/8" tall x 20" deep and a cut out width of 22-1/2 inch. Would…
view full answer...Hello Michael. The Torklift Tie Down Set #TL82DR is what I recommend for your 2012 Ram 2500 long bed. This kit comes with both the front and rear tie downs. It is important to note that these tie downs are intended for trucks without steps or running…
view full answer...Hey George, welcome back. I double checked with the manufacturer and the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY38FR is the correct option to replace your MORryde part number SPB72-1621HD. It works with pin weights from…
view full answer...Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
view full answer...Hi Darrin! The MORryde RV Cargo Slide Tray - 90" x 23" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR78RV can clear a lip up to 1.57 inches, so call it 1-1/2 inches to be safe. If you need it to be higher, we do also have the Height…
view full answer...The Torklift #TLA7004 Camper Anchor Relocation Kit does not require drilling into the camper or the truck. The adapter brackets would be attached to the camper by drilling holes at the location of the original anchor point, as shown in the photo…
view full answer...Hi David, I called MORyde to check the internal dimensions of the MORyde RV Cargo Slide Out Tray part #MR78RV and they confirmed the internal length is 88.21 inches long and the internal width is 19.84 inches wide. Considering the Blackstone Griddle,…
view full answer...Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…
view full answer...Hello John, we have just the thing! Take a look at the Air Lift WirelessAIR Suspension System for Air Helper Springs Kit #AL27DQ. This comes with a wireless compressor and an auxiliary air tank. The air tank comes with a hose and inflator that can be…
view full answer...For your existing Husky 16K EZ Roller 5th Wheel Hitch you can use the Reese Replacement Pins and Clips #6014 to attach it to the base rails. These are standard sized (1/2" diameter and 3-1/4" long) pins that will work perfectly for your…
view full answer...Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…
view full answer...























































