Custom Fit 2012 Chevrolet Tahoe Accessories

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball…

The Curt Class III hitch, part #C13161 is indeed a fit for a 2013 Chevy Tahoe PPV (Police Package Vehicle). You can see it being installed on a 2012 St. Charles County Police PPV Tahoe by clicking the provided link. The tow package harness is…

Too much hitch weight can cause some rocking side to side, but typically the rocking or trailer sway is more commonly an issue on a trailer that there is not enough tongue weight. Usually too much hitch weight (tongue weight) will just cause…

I am not sure which flood light that you are referring to but if you know the type and wattage rating of the bulb then you can get a good idea of the lumen output. The Optronics Halogen Utility Light part #QH16CTS for example contains a 35 watt…

I recommend the Buyers Products Ultra Bright LED Flood Light in either 4,050 Lumens #3371492190 or 9,000 Lumens #3371492196, to replace the halogen lights on your Haulmark Race Enclosed Trailer. You will want to verify the fitment for these as I am…

Availability of mud flap products for your 2011 Chevrolet Tahoe LTZ depends on whether or not you have the factory add-on fender flares. If you do have the factory fender flares then the only option for rear mud flaps is a hitch-mount type like…

You'll need to use a small slot screw driver to pop the center of the plastic rivet up and out, once out the rest of the rivet will come right out. You should be able to see the slot on the plastic rivet that let's a screwdriver slide under…

You won't see too much information on how tight to make a bar style friction sway control unit because it will be different for every situation. You would make it about as tight as you think it needs to be and then tow the trailer to see if it…

When it comes to installing a trailer hitch on your 2014 Chevrolet Tahoe The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inches #C13161 is confirmed to fit all 2wd Tahoes. This trailer has a bolt-on installation with no welding required.…

Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity. With trailer tires you always want to have them inflated to their…

The hitch ball angle adjustment on weight distribution systems is designed to provide more or less distribution of the tongue weight on your trailer hitch to the trailer and vehicle axles. If you adjust the ball angle farther away from the towing…

Weight distribution heads are adjustable to get the spring bars level or just below level with the trailer frame. Depending on the trailer frame, the head may need to be set at 90 degrees, it also may need to be tilted down as far as possible to keep…