Custom Fit 2008 Jeep Wrangler Accessories

There currently isn't a compatible Blue Ox base plate for your 2022 Jeep Wrangler Sahara. There is however the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 which is a compatible fit (standard factory bumpers). These base plates have…

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

The RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter #RM-038 comes with all the hardware need to attach your base plate to your towbar. If you have an XL or EZ brackets you will need the Roadmaster Tow Bar Quick…

There isn't a 100% direct mathematical relationship I'm aware of but yes, the further rearward you go from the hitch receiver, the lower the tongue weight capacity gets. Which is why extenders typically will reduce a trailer hitch's…

The Draw-Tite Front Mount Trailer Hitch Receiver, part #65069 is a good fit for your 2008 Jeep Wrangler. I have attached a drawing that shows how the hitch is attached to the vehicle. As you can see, the attach points are on the underside of the…

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

The front mount trailer hitches for a 2016 Jeep Wrangler Unlimited like the Draw-Tite Front Mount Trailer Hitch Receiver part #65069 are all designed for models with the factory front bumper. It is no possible for the manufacturer nor I to confirm…

You can absolutely do that. It's recommended that the brake light switch be used because of its close proximity to where the brake controller is installed, but if you wish to tap into the dedicated 3rd brake lamp circuit instead, you can…

The answer that you read on a previous question means the Autowbrake part #3430001 will override the vehicle's integrated brake controller because the blue wire from the trailer connector (that activates the electric brakes) is now wired to the…

I went out to the warehouse and pulled RoadMaster Replacement Pin and Clip #RM-910006. The straight part of the pin is 3-1/2 inches and the diameter of the pin is 1/2 inch.

I went ahead and checked out the Blue Ox Tow Bar Wiring Kit BLU79FR, and it actually is only deigned to fit the 2018-2021 Jeep Wranglers. Instead, I recommend installing the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56200. This…